HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ELCRIN™ DMX6034RCC
Manufacturer:
LNP™
Scratch Resistant
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SLX2291T
Manufacturer:
LNP™
High flow, Weatherable, Enhanced UV stabilization, Good processability with added mold release, Targeted for potential paint elimination through a wide range of high gloss opaque colors, Also available in transparent or tints
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, Weatherable, Enhanced UV stabilization, Good processability with added mold release, Targeted for potential paint elimination through a wide range of high gloss opaque colors, Also available in transparent or tints
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SLX2291T
Manufacturer:
U.V. stabilized or stable to weather, Transparent, Opaque, Translucent
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Transparent, Opaque, Translucent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SLX2271AML
Manufacturer:
LNP™
Good Weatherability and Scratch Resistance
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Weatherability and Scratch Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SLX2271AML
Manufacturer:
LNP™
Good Weatherability and Scratch Resistance
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Weatherability and Scratch Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ HPC17
Manufacturer:
LNP™
High heat, Biocompatible according to ISO 10993 or USP Class VI, Optimized to reduce yellowing
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat, Biocompatible according to ISO 10993 or USP Class VI, Optimized to reduce yellowing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SLX1462T
Manufacturer:
LNP™
weatherable, scratch resistant, chemical resistant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
weatherable, scratch resistant, chemical resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SLX1462T
Manufacturer:
LNP™
weatherable, scratch resistant, chemical resistant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
weatherable, scratch resistant, chemical resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SD3038
Manufacturer:
LNP™
Ductile, Copolymer
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Ductile, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SD3038
Manufacturer:
LNP™
Ductile, Copolymer
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Ductile, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ SLX1271D
Manufacturer:
LNP™
Weatherable, U.V. stabilized
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Weatherable, U.V. stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SLX1271D
Manufacturer:
Low viscosity, weatherable, UV stabilized, platable
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low viscosity, weatherable, UV stabilized, platable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ HR156R
Manufacturer:
LNP™
Higher RTI, better scratch resistance, higher modulus, excellent heat resistance performance, good processability
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Higher RTI, better scratch resistance, higher modulus, excellent heat resistance performance, good processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ HR156R
Manufacturer:
LNP™
Higher RTI, better scratch resistance, higher modulus, excellent heat resistance performance, good processability
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Higher RTI, better scratch resistance, higher modulus, excellent heat resistance performance, good processability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ FXM1838
Manufacturer:
LNP™
excellent flowability, UV stabilized in special metallic colors
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent flowability, UV stabilized in special metallic colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ ML0111
Manufacturer:
LNP™
high flow, high impact resistance performance and colorable
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, high impact resistance performance and colorable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ HPC17
Manufacturer:
LNP™
High heat, Biocompatible according to ISO 10993 or USP Class VI, Optimized to reduce yellowing
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat, Biocompatible according to ISO 10993 or USP Class VI, Optimized to reduce yellowing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ FXM1838
Manufacturer:
LNP™
excellent flowability, UV stabilized in special metallic colors
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent flowability, UV stabilized in special metallic colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ EXL9818
Manufacturer:
LNP™
good Processability, good Modulus and heat resistance, non-chlorine and non-bromine flame retardant
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good Processability, good Modulus and heat resistance, non-chlorine and non-bromine flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ EXL9818
Manufacturer:
LNP™
good Processability, good Modulus and heat resistance, non-chlorine and non-bromine flame retardant
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good Processability, good Modulus and heat resistance, non-chlorine and non-bromine flame retardant
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more