HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Copolymer EXL1112T
Manufacturer:
LEXAN™
transparent
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1112
Manufacturer:
LEXAN™
High flow opaque injection molding (IM) grade, good low temperature ductility
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow opaque injection molding (IM) grade, good low temperature ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DMX2415
Manufacturer:
LEXAN™
Scratch Resistant, Copolymer
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1112
Manufacturer:
LEXAN™
High flow opaque injection molding (IM) grade, good low temperature ductility
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow opaque injection molding (IM) grade, good low temperature ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DMX2415
Manufacturer:
LEXAN™
Scratch Resistant, Copolymer
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DMX1435
Manufacturer:
LEXAN™
UV stabilized standard flow polycarbonate copolymer resin with improved scratch resistance, improved dielectric performance (lower Df). It is both transparency and colorable available solutions to the applications such as 5G related devices, anti-scratch covers, etc.
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized standard flow polycarbonate copolymer resin with improved scratch resistance, improved dielectric performance (lower Df). It is both transparency and colorable available solutions to the applications such as 5G related devices, anti-scratch covers, etc.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer CXT19UV
Manufacturer:
LEXAN™
UV-stabilized, Broad processing window, Limited yellowing, Crystal clear transparency
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV-stabilized, Broad processing window, Limited yellowing, Crystal clear transparency
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DMX1435
Manufacturer:
LEXAN™
UV stabilized standard flow polycarbonate copolymer resin with improved scratch resistance, improved dielectric performance (lower Df)
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized standard flow polycarbonate copolymer resin with improved scratch resistance, improved dielectric performance (lower Df)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer CXT19UV
Manufacturer:
LEXAN™
UV-stabilized, Broad processing window, Limited yellowing, Crystal clear transparency
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV-stabilized, Broad processing window, Limited yellowing, Crystal clear transparency
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17UV
Manufacturer:
LEXAN™
UV-stabilized, High Heat, Crystal Clear Transparency
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV-stabilized, High Heat, Crystal Clear Transparency
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17UV
Manufacturer:
High Heat Polycarbonate Copolymer Resin
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat Polycarbonate Copolymer Resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17UV
Manufacturer:
LEXAN™
UV-stabilized, High Heat, Crystal Clear Transparency
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV-stabilized, High Heat, Crystal Clear Transparency
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17EX
Manufacturer:
LEXAN™
crystal clear transparency, low plateout, broad processing window, limited yellowing
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
crystal clear transparency, low plateout, broad processing window, limited yellowing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT19
Manufacturer:
Vicat of 190°C and crystal clear transparency, optimized to have a broad processing window with limited yellowing, available in limited transparent colors
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Vicat of 190°C and crystal clear transparency, optimized to have a broad processing window with limited yellowing, available in limited transparent colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17EX
Manufacturer:
LEXAN™
crystal clear transparency, low plateout, broad processing window, limited yellowing
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
crystal clear transparency, low plateout, broad processing window, limited yellowing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17EX
Manufacturer:
High Heat Polycarbonate Copolymer Resin
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat Polycarbonate Copolymer Resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer CXT17UV
Manufacturer:
LEXAN™
High Heat Polycarbonate Copolymer Resin
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat Polycarbonate Copolymer Resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT19
Manufacturer:
Vicat of 190°C and crystal clear transparency, optimized to have a broad processing window with limited yellowing, available in limited transparent colors
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Vicat of 190°C and crystal clear transparency, optimized to have a broad processing window with limited yellowing, available in limited transparent colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17
Manufacturer:
LEXAN™
High Heat Polycarbonate Copolymer Resin
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat Polycarbonate Copolymer Resin
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CXT17
Manufacturer:
LEXAN™
High Heat Polycarbonate Copolymer Resin
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat Polycarbonate Copolymer Resin
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more