HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
FLEX NORYL™ Resin WCA871A
Manufacturer:
flexible, non-reinforced extrudable blend, flame retardant, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, flame retardant, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCD795
Manufacturer:
FLEX NORYL™
Flexible, non-reinforced, extrudable, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, non-reinforced, extrudable, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCA871A
Manufacturer:
flexible, non-reinforced extrudable blend, heat deformation performance, good electric properties, low specific gravity
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend, heat deformation performance, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCA105
Manufacturer:
FLEX NORYL™
flexible, non-reinforced, extrudable, non-halogenated flame retardant, performance capable of meeting UL VW-1 requirements, 105C end use temperature rating, heat deformation performance as defined by UL 1581, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, extrudable, non-halogenated flame retardant, performance capable of meeting UL VW-1 requirements, 105C end use temperature rating, heat deformation performance as defined by UL 1581, superior thermal stability, very low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCA105
Manufacturer:
FLEX NORYL™
Flexible, Non-reinforced, Extrudable
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flexible, Non-reinforced, Extrudable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SZ800
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCA105
Manufacturer:
flexible, non-reinforced, extrudable, heat-resistant, low water absorption, good electric properties, low specific gravity
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced, extrudable, heat-resistant, low water absorption, good electric properties, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCA105
Manufacturer:
flexible, non-reinforced extrudable blend
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flexible, non-reinforced extrudable blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCA105
Manufacturer:
FLEX NORYL™
{'Shore D Hardness': 56, 'Processing': 'Injection Molding', 'Special Characteristics': 'Flame retardant'}
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Shore D Hardness': 56, 'Processing': 'Injection Molding', 'Special Characteristics': 'Flame retardant'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ VN30V
Manufacturer:
Acoustical Barrier Properties
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acoustical Barrier Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ W5002
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ SZ800
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WCA105
Manufacturer:
FLEX NORYL™
{'Shore D Hardness': 56, 'Processing': 'Injection Molding', 'Special Characteristics': 'Flame retardant'}
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Shore D Hardness': 56, 'Processing': 'Injection Molding', 'Special Characteristics': 'Flame retardant'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xyron™ 640V
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ 540V
Manufacturer:
No Characteristics
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ 340Z
Manufacturer:
Flame retardant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ 442Z
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ 200H
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ 240Z
Manufacturer:
Flame retardant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ 440Z
Manufacturer:
Flame retardant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more