HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2205 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Xytron™ U1535E
Manufacturer:
Unreinforced, Extrusion
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Unreinforced, Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xtel® XK2340_LP
Manufacturer:
Injection Molding
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XE3035NA
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XE5030BL
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XE3035BL
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XE5030NA
Manufacturer:
Low Odor
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Therma-Tech™ TT9200-5003 EC Grey
Manufacturer:
Increased electrical conductivity, Thermally Conductive
Physical Properties
Density
1.78
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LARTON G/40 I6
Manufacturer:
{'Processing': 'Injection Molding', 'Features': 'Low Smoke, Chemical Resistance, General Chemical Resistance'}
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing': 'Injection Molding', 'Features': 'Low Smoke, Chemical Resistance, General Chemical Resistance'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OFC08V
Manufacturer:
LNP™ THERMOCOMP™
high heat and chemical resistance, good warpage control, inherently flame-retardant, low flash, good processability, excellent LDS capability, plating performance, stable dielectric properties
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat and chemical resistance, good warpage control, inherently flame-retardant, low flash, good processability, excellent LDS capability, plating performance, stable dielectric properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound OFC08V
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Low Warpage, Chemical Resistance
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Low Warpage, Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DIC-PPS FZ-820
Manufacturer:
Good Adhesion
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OX10324
Manufacturer:
Thermally Conductive and Non-Brominated, Non-Chlorinated Flame Retardant
Physical Properties
Density
1.75
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive and Non-Brominated, Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1302 P-1
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Therma-Tech™ TT9200-5001 EI White
Manufacturer:
Thermally Conductive
Physical Properties
Density
2.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AQUALOY® TR314-2
Manufacturer:
No Characteristics
Physical Properties
Density
1.84
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OF00AN
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OF00AN
Manufacturer:
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Impact Modified, Low Chloride content, Good Warpage Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OFM46
Manufacturer:
high stiffness and strength, excellent dimensional stability and warpage control, good flame and chemical resistance, low coefficient of thermal expansion and moisture absorption
Physical Properties
Density
1.77
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness and strength, excellent dimensional stability and warpage control, good flame and chemical resistance, low coefficient of thermal expansion and moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound OF008G
Manufacturer:
LNP™
Injection Molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xytron™ G4024T
Manufacturer:
Excellent Mold Release, Flame Retardant
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent Mold Release, Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Total 2205 materials | Scroll down for more