HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-GF30 black 9005
Manufacturer:
AUROmid
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 V0 black
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 G30-01 schwarz
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 black
Manufacturer:
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030109 GF30
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),easy flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030588 GF30
Manufacturer:
heat stabilised,hot oil resistant,easy release (demoulding),good flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,hot oil resistant,easy release (demoulding),good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 ECO 2030/116 GF30
Manufacturer:
ALTECH
impact modified,contains recycled material
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030/589 GF30
Manufacturer:
heat stabilised,hot oil resistant,easy release (demoulding),good flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,hot oil resistant,easy release (demoulding),good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 FC 2030/107 GF30
Manufacturer:
heat stabilised,injection moulding grade,easy release (demoulding)
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,injection moulding grade,easy release (demoulding)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 ECO 2030/116.01 GF30
Manufacturer:
ALTECH
impact modified,processing stabilised,contains recycled material
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,processing stabilised,contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910/1 GF30 MO1
Manufacturer:
ALCOM
improved sliding / wear,heat stabilised
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910/1 GF30 MO2
Manufacturer:
improved sliding / wear,heat stabilised
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030/500 HR GF30 BK0002-00
Manufacturer:
high heat stabilised,hot oil resistant,good hydrolysis resistant,glycol resistant,easy release (demoulding),injection moulding grade
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,hot oil resistant,good hydrolysis resistant,glycol resistant,easy release (demoulding),injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030/109 GF30 GY1176-12LS
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),easy flow,laser etchable (dark etching)
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),easy flow,laser etchable (dark etching)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030/106 GF30
Manufacturer:
heat stabilised,high surface gloss
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030578 GF30
Manufacturer:
heat stabilised,easy release (demoulding),easy flow
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2030/109 GF30 BK
Manufacturer:
ALTECH
Heat stabilized or stable to heat
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_AKROMID® A3 GF 30 natural 2397
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_Akulon® SG-KGS6
Manufacturer:
Halogen free and free of red phosphorous
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Halogen free and free of red phosphorous
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 A3 GF 30 S1 natural (3695)
Manufacturer:
Akro-Plastic GmbH
High impact or impact modified
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more