HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-GF25 RTP 204
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 SAXAMID™ 226F5
Manufacturer:
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 RTP 204 FR
Manufacturer:
Flame retardant
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_POLIMID A 25 GF V0 HFR KW
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_RADIFLAM A RV250 AF 375 BK
Manufacturer:
RadiciGroup
Flame retardant, High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_RADIFLAM A RV250 FR 100 NT
Manufacturer:
flame retardant, halogen and phosphorus free, low smoke toxicity, good mechanical resistance, natural colour
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flame retardant, halogen and phosphorus free, low smoke toxicity, good mechanical resistance, natural colour
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_RADIFLAM A RV250 HF 333 BK
Manufacturer:
RadiciGroup
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_POLIMID A 25 GF V0A TR1
Manufacturer:
No Characteristics
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_POLIMID A 25 GF V0FK KW
Manufacturer:
Flame retardant
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_PG25-01NC
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 HS1 BK0401 04017
Manufacturer:
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_LOXIAMID PA66 FRV0HF GF25 HS2 04045
Manufacturer:
Flame retardant, Halogen-free, High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 HS3 HR2 BK0401 04062
Manufacturer:
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25_LOXIAMID PA66 FRV0HF GF25 HS1 04030
Manufacturer:
Flame retardant, Halogen-free, High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 HS1 04027
Manufacturer:
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 FRIANYL® A3 GF25 V0
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 FRIANYL® A3 GF25 V0XI
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 FRIANYL® A3 H GF25 V0 GY 7016E
Manufacturer:
Celanese
Injection molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 FRIANYL® A3 GF25 V0 OR 2008P
Manufacturer:
Flame retardant
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF25 NC Q1C501
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more