HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3830 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
HOSTAFORM® C 9021 MD
制造商:
Celanese
Injection Molding Copolymer
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
CELCON® MC270 POM-MD
制造商:
Celanese
Processing/Physical Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 9021 GV3/30 POM-GB30
制造商:
Celanese
high resistance to thermal and oxidative degradation
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high resistance to thermal and oxidative degradation
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 9021 TF (POM+PTFE)
制造商:
Celanese
good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation; for sliding combinations with very low coefficient of friction
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation; for sliding combinations with very low coefficient of friction
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF35
制造商:
Celanese
Creep Resistance, Low Warpage
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPA-GF35
制造商:
Celanese
High stiffness and strength at elevated temperatures, excellent creep behavior, small influence on mechanical properties after moisture uptake, good dimensional stability and low warpage.
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High stiffness and strength at elevated temperatures, excellent creep behavior, small influence on mechanical properties after moisture uptake, good dimensional stability and low warpage.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FRIANYL® XT4 GF30 V0I
制造商:
Celanese
Specifically designed for electrical and electronic applications that require high thermal, peak and continuous resistance together with compliance with the most stringent safety requirements, this compound is also easy to process with excellent aesthetic results. Suitable for components that need to withstand the reflow soldering process (SMT).
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Specifically designed for electrical and electronic applications that require high thermal, peak and continuous resistance together with compliance with the most stringent safety requirements, this compound is also easy to process with excellent aesthetic results. Suitable for components that need to withstand the reflow soldering process (SMT).
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-GF70-13_Celanese
制造商:
赛兰尼斯
No Characteristics
Physical Properties
Density
1.66
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® UV90Z XAP®2
制造商:
Celanese
Processing/Physical Characteristics Value Unit Test Standard ISO Data
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics Value Unit Test Standard ISO Data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® UV270Z XAP®2
制造商:
Celanese
Injection Molding U.V. stabilized or stable to weather
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TF-10XAP®
制造商:
Celanese
Low Emission, Copolymer
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Emission, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
S 9364UV_Celanese
制造商:
无
Copolymer
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® MT® SlideX® 2404 ECO-B
制造商:
Celanese
Injection Molding Tribologic Grade, Copolymer
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® M25IE
制造商:
Celanese
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 27021 XAP® C
制造商:
Celanese
Easy flow injection molding grade with very low emissions and migrations
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy flow injection molding grade with very low emissions and migrations
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 27021 XAP®2 LS
制造商:
Celanese
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
CELCON® LW90-F2
制造商:
Celanese
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
POM_CELCON® CF802 10/9022
制造商:
Celanese
Increased electrical conductivity
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 9021 GV1/20 XGM
制造商:
Celanese
Injection Molding Copolymer
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 9021 GV1/20
制造商:
Celanese
High resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage
Recorded properties are for screening; verify source data and conditions.
Total 3830 materials | Scroll down for more