HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25706 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA66-GF15_PG15-01ABK
制造商:
None
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 PALMID® R 66 S GF15
制造商:
None
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-G15
制造商:
金发科技股份有限公司
Low Warpage
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_NA40 GR15 NL XA 20
制造商:
None
Flame retardant
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_LNP™ THERMOCOMP™ Compound RF003ES
制造商:
沙特基础工业公司
Heat Stabilized, Easy Molding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_LNP™ LUBRILOY™ Compound RF203AXH
制造商:
沙特基础工业公司
Wear Resistant, Healthcare
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_NEVIMID 66 A G15L
制造商:
None
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_NEVIMID 66 A G15
制造商:
None
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 LATAMID 66 VH2 G15
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_Enviramid® N1315HL BK
制造商:
None
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 NC Q1B501
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_FORMPOLY® SN66GF15LT NATURAL
制造商:
None
lubricated
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
lubricated
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15 ECOMID® A H GF15 BK 90042
制造商:
塞拉尼斯
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_FORMPOLY® SN66GF15LT NATURAL
制造商:
None
lubricated
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
lubricated
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_DOMAMID 66G15H2
制造商:
DOMO 工程塑料
Heat stabilized or stable to heat
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_DOMAMID 66G15H1 500
制造商:
None
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_DOMAMID 66G15IK4
制造商:
DOMO工程塑料
High impact or impact modified
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_DOMAMID 66G15I1
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_CELANYL® A3 J GF15 BK 9005U
制造商:
赛兰尼斯
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF15_CELANYL® A3 HH GF15 BK 90052
制造商:
赛兰尼斯
Heat stabilized
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Total 25706 materials | Scroll down for more