HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-MD10 500
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2515 NC 11021B
Manufacturer:
Celanese
Natural Color
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2515 NC 11021A
Manufacturer:
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2515 NC 11021A
Manufacturer:
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2015 NC 11021
Manufacturer:
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2015 NC 11021
Manufacturer:
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 HH J KGF2010 BK 9005CK
Manufacturer:
Black
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 HH J KGF2010 BK 9005CK
Manufacturer:
Black
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8.4 GF10 MR20 NC0001-00
Manufacturer:
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8.4 GF10 MR20 BK0002-00
Manufacturer:
ALCOM
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 SV12-778MCF
Manufacturer:
low warpage,heat stabilised,flow line optimised,low tendency to flow lines
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage,heat stabilised,flow line optimised,low tendency to flow lines
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 9008 GF10 MR20 SV1285-04MCF
Manufacturer:
low warpage,heat stabilised,flow line optimised,low tendency to flow lines
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage,heat stabilised,flow line optimised,low tendency to flow lines
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-L30_Polywood VIS 30 PA6 A3 16
Manufacturer:
Contains renewable resources
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8.4 GF10 MR20 BK0002-00
Manufacturer:
ALCOM
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 4230/540 MR20 GF10 FR
Manufacturer:
heat stabilised,low warpage,injection moulding grade,halogen-free flame retardant
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,low warpage,injection moulding grade,halogen-free flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/5.2 CF/MR25
Manufacturer:
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/13 GF15 MRX45
Manufacturer:
high density,heat stabilised,high acoustic damping
Physical Properties
Density
2.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high density,heat stabilised,high acoustic damping
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 IM
Manufacturer:
heat stabilised,low warpage,improved surface appearance,impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,low warpage,improved surface appearance,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/5 CF/MR BK12-966
Manufacturer:
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 ECO 4230/100 GF10 MR20
Manufacturer:
ALTECH
heat stabilised, good flow, low warpage, high surface quality
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, good flow, low warpage, high surface quality
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more