HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6 ECO 4230/100.02 GF10 MR20
Manufacturer:
heat stabilised,good flow,low warpage,high surface quality
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,good flow,low warpage,high surface quality
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-L20
Manufacturer:
High impact or impact modified
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-K30
Manufacturer:
SLOVAMID®6 C 30 LS
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-L20
Manufacturer:
High impact or impact modified
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I_TECHNYL SHAPE C 448CR BK
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
TECHNYL C 218M NC
heat-aging stabilized, impact modified, for injection moulding, natural color
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat-aging stabilized, impact modified, for injection moulding, natural color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
for injection moulding, natural color
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
for injection moulding, natural color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
TECHNYL C 256SI NC
Injection Molding High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I SCHULAMID® 6 MV HI K1893
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I Akulon® Fuel Lock FLE-LP NA99001
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
0.869
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I-MF10_TECHNYL 4EARTH C5E 236 MT10 BK
Manufacturer:
improved impact resistance
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I Akulon® Fuel Lock FLX-LP (K-X08836)
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-I-GF35_Akulon® K224-HPG7
Manufacturer:
Impact Modified, Heat Stabilized
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2003/712 GF3 IM UV
Manufacturer:
ALTECH
impact modified,fast solidifying,easy release (demoulding),UV stabilised
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,fast solidifying,easy release (demoulding),UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2030/516.01 GF30 IM
Manufacturer:
easy release (demoulding),impact modified,injection moulding grade,heat stabilised
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding),impact modified,injection moulding grade,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more