HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-GF50_Akulon® Ultraflow K-FHG0
Manufacturer:
Heat Stabilized, High Flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, High Flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2050/100 GF50
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),injection moulding grade
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2050/500
Manufacturer:
heat stabilised,easy release (demoulding),good flow
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 250-H/GF50
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2050/560 GF50
Manufacturer:
high heat stabilised,easy release (demoulding),easy flow,injection moulding grade
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,easy release (demoulding),easy flow,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 FC 2050/100 GF50
Manufacturer:
heat stabilised,injection moulding grade
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 250-GF50
Manufacturer:
Regional Availability Europe
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability Europe
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 255-GF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 black 9005
Manufacturer:
AUROmid
Heat stabilized
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 black
Manufacturer:
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2050/720 GF50 UV
Manufacturer:
heat stabilised,highly UV stabilised
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,highly UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_AKROMID® B3 GF 50 S1 black 2000
Manufacturer:
Akro-Plastic GmbH
High impact or impact modified
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_AKROMID® B3 GF 50 black 2939
Manufacturer:
Akro-Plastic GmbH
Injection Molding Automotive
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_AKROMID® B3 GF 50 S1 natural 3694
Manufacturer:
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_Akulon® GA-XLG0
Manufacturer:
UV Stabilized
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_AKROMID® B3 GF 50 black 2939
Manufacturer:
Akro-Plastic GmbH
Injection Molding Automotive
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 AKROMID® B3 GF 50 natural 3785
Manufacturer:
Injection Molding
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 AKROMID® B3 GF 50 natural 2475
Manufacturer:
Injection Molding Automotive
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_AKROMID® B3 GF 50 2 S1 black 3050
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_AKROMID® B3 GF 50 natural 3785
Manufacturer:
Injection Molding
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more