HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-GF50 AKROMID® B28 GF 50 black
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50
Manufacturer:
No Characteristics
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 AKROMID® B28 GF 50 9 natural
Manufacturer:
No Characteristics
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50
Manufacturer:
long fiber reinforced
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 AKROMID B3 GF 50 9 RM-M natural
Manufacturer:
Natural Color
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 AKROMID B3 GF 50 RM-M natural
Manufacturer:
Injection Molding
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50 AKROMID B3 GF 50 9 RM-M black (3147)
Manufacturer:
Injection Molding
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF47 AKROMID® B3 GF 47 1 TM black 4936
Manufacturer:
Akro-Plastic GmbH
Tribologic Grade
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_4MID 9B22150
Manufacturer:
No Characteristics
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_4MID 9B22150 I
Manufacturer:
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF50_AKROMID_ B3 GF 50 4 RM-M black (3221)
Manufacturer:
Akro-Plastic GmbH
Injection Molding
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF45 Xuanwu™ XW5301
Manufacturer:
Heat stabilized or stable to heat, General Chemical Resistance
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF45 Xuanwu™ XW5301
Manufacturer:
Heat stabilized or stable to heat, General Chemical Resistance
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF45 Tarnamid® T-27 GF45
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF45 SAXAMID™ 126F9
Manufacturer:
Injection Molding
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF45_Vydyne® B 45 GF BK EST K1
Manufacturer:
Ascend
Heat stabilized, standard flow, black, lubricated
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized, standard flow, black, lubricated
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF45 Titalon 1450GF
Manufacturer:
Injection Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF45 Titalon 1450GFT
Manufacturer:
No Characteristics
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more