HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-GF35 NC 1102/HA
Manufacturer:
Celanese
Heat stabilized or stable to heat
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_CELANYL® B2 HH GF35 BK 9005/NX
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_CELANYL® B3 HH GF25 BK 90052
Manufacturer:
Heat stabilized
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_BK_90052
Manufacturer:
General purpose grade, suitable for any application requiring high mechanical performances and a medium term heat ageing resistance.
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, suitable for any application requiring high mechanical performances and a medium term heat ageing resistance.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35 GY 7024/E
Manufacturer:
Celanese
General purpose grade, good mechanical performances
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, good mechanical performances
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_CELANYL® B3 HH GF25 BK 90052
Manufacturer:
Heat stabilized
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35 GY 7024/E
Manufacturer:
Celanese
General purpose grade, good mechanical performances
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, good mechanical performances
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_CELANYL® B3 H GF35 NC 11022
Manufacturer:
Celanese
Glass Filled
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Glass Filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_CELANYL® B3 HH GF35 BK 9005E
Manufacturer:
Heat stabilized
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_CELANYL® B2 HH GF35 BK 90051
Manufacturer:
Celanese
Black
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35 black 9005
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_Akulon® N24-G7
Manufacturer:
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2035/509 GF35 LV
Manufacturer:
ALTECH
easy release (demoulding), good flow, improved surface appearance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding), good flow, improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35 black 9005
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35_Akulon® Ultraflow K-FHG7
Manufacturer:
Heat Stabilized, High Flow
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, High Flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2035/109 GF35
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),injection moulding grade
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2035/509 GF35
Manufacturer:
ALTECH
easy release (demoulding),good flow,improved surface appearance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding),good flow,improved surface appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35 black
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF35
Manufacturer:
Akro-Plastic GmbH
Injection Molding
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more