HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-GB30 EPLAMID 6 CBR 30 BK Q1D001
Manufacturer:
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30_DOMAMID 6B30H2 BK
Manufacturer:
No Characteristics
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30 EMLON 6 GBR 30
Manufacturer:
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30 BALTAMID 6 GK 30 natur
Manufacturer:
{'mold_shrinkage_md': '0.011 mm/mm', 'izod_impact_strength_23c': '30 / - kJ/m²', 'tensile_strength_at_break': '70 / 40 MPa', 'elongation_at_break': '8 / 12 %', 'flexural_modulus': '4000 / 2500 MPa', 'rockwell_hardness': 'R 120 / R 105', 'glow_wire_flammability_index': '650 °C', 'dtul_66psi': '190 °C', 'dtul_264psi': '95 °C', 'melting_temperature': '222 °C', 'vicat_temperature': '195 °C', 'surface_resistivity': '* / 1E11 Ohm', 'volume_resistivity': '1E15 / 1E11 Ohm*cm', 'water_absorption': '0.9 %', 'density': '1350 kg/m³'}
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'mold_shrinkage_md': '0.011 mm/mm', 'izod_impact_strength_23c': '30 / - kJ/m²', 'tensile_strength_at_break': '70 / 40 MPa', 'elongation_at_break': '8 / 12 %', 'flexural_modulus': '4000 / 2500 MPa', 'rockwell_hardness': 'R 120 / R 105', 'glow_wire_flammability_index': '650 °C', 'dtul_66psi': '190 °C', 'dtul_264psi': '95 °C', 'melting_temperature': '222 °C', 'vicat_temperature': '195 °C', 'surface_resistivity': '* / 1E11 Ohm', 'volume_resistivity': '1E15 / 1E11 Ohm*cm', 'water_absorption': '0.9 %', 'density': '1350 kg/m³'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30_CELANYL® B3 W GB30 BK 9005U
Manufacturer:
Black
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30 Celanese
Manufacturer:
General purpose grade, suitable for technical applications
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, suitable for technical applications
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30_DOMAMID 6B30 300 NC
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30_BK_9005
Manufacturer:
General purpose grade, suitable for technical applications.
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, suitable for technical applications.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 3030/109 GB30
Manufacturer:
ALTECH
high heat stabilised,easy release (demoulding),low warpage,easy flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,easy release (demoulding),low warpage,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30_AUROmid® PA6 GK30 black
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 3030/109 GB30 BK12-950
Manufacturer:
high heat stabilised,easy release (demoulding),low warpage,easy flow
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,easy release (demoulding),low warpage,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 250-UV/GK30 PA6-GB30
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 3030/320 GB30 UV
Manufacturer:
ALTECH
fast solidifying,easy release (demoulding),low warpage,highly UV stabilised,heat stabilised
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
fast solidifying,easy release (demoulding),low warpage,highly UV stabilised,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 3030/109 GB30 NC0001-00
Manufacturer:
ALTECH
high heat stabilised,easy release (demoulding),low warpage,easy flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,easy release (demoulding),low warpage,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30 AKROMID® B3 GK 30 natural (2719)
Manufacturer:
Akro-Plastic GmbH
Low Warpage
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 3030/220 GB30 UV
Manufacturer:
heat stabilised,easy release (demoulding),UV stabilised
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB15 Vydyne® B 15 GB NT KW2
Manufacturer:
standard flow, organic heat stabilized
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow, organic heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB25 RTP 200 A GB 25
Manufacturer:
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB30 9B22230 H
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GB15 LS
Manufacturer:
UV-stabilized
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV-stabilized
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more