HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-GF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF10_CELANYL® B2 W GF10 NC 11021
Manufacturer:
Natural Color
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF10 CELYANL® B2 W GF10 NC 11021
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF10
Manufacturer:
SLOVAMID®6 GF 10 FRG 5
Flame retardant
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2010/100 GF10
Manufacturer:
ALTECH
heat stabilised,fast solidifying
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,fast solidifying
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF10
Manufacturer:
High-strength, heat-resistant, and has good mechanical properties
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High-strength, heat-resistant, and has good mechanical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+Z40 Tarnamid® T-27 GF35 P5
Manufacturer:
Tribologic Grade
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF10
Manufacturer:
Flame retardant
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+X45_CELANYL® B3 HH SGF2515 BK 9005E
Manufacturer:
General purpose grade suitable for any technical application, long term heat ageing resistance, high rigidity and low warpage.
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade suitable for any technical application, long term heat ageing resistance, high rigidity and low warpage.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-(GF+X)45
Manufacturer:
General purpose grade suitable for any technical application, long term heat ageing resistance, high rigidity and low warpage.
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade suitable for any technical application, long term heat ageing resistance, high rigidity and low warpage.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+X45 Tarnamid® T-27 GF30 TF15
Manufacturer:
Tribologic Grade
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+X30_CELANYL® B3 HH SGF1809 BK 90052
Manufacturer:
Heat stabilized, Low warpage
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized, Low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+X30_CELANYL® B3 HH SGF1809 BK 90052
Manufacturer:
High stiffness, low warpage, long term heat ageing resistance, good surface quality
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High stiffness, low warpage, long term heat ageing resistance, good surface quality
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-(GF+T)40
Manufacturer:
SLOVAMID®6 GF 15 T 25
Low Warpage
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-(GF+T)40
Manufacturer:
Injection Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+MX_Starflam BFR552Y6
Manufacturer:
Flame retardant
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+MX40 Tarnamid® T-27 GF25MT15
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+MX55_POLIMID B 25 30 GF BS EM
Manufacturer:
EM
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
EM
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-GF+MX45_SCHULAMID® 6 MGF 45 FR 6
Manufacturer:
flame-retardant, low warpage
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
flame-retardant, low warpage
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more