HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1225 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LUBRILOY™ Compound U2000A
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AKROMID® T9 black (7953)
Manufacturer:
Akro-Plastic GmbH
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound U2000A
Manufacturer:
LNP™ LUBRILOY™
Wear Resistant
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MW 53.2000
Manufacturer:
None
No Characteristics
Physical Properties
Density
5.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO HA-4400MP
Manufacturer:
None
No Characteristics
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4009 A MS
Manufacturer:
RTP公司
Injection Molding
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Amodel® A-1240 L
Manufacturer:
斯恩斯克
Low Warpage
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4007 MS
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LATIGLOSS 57 G/60 F2
Manufacturer:
None
High Gloss
Physical Properties
Density
1.77
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4005 MS
Manufacturer:
RTP公司
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LARAMID G/30-V0HF1
Manufacturer:
None
{'Flame_reistant': 'Flame retardant', 'Halogen_free': 'Halogen-free', 'Phosphorus_free': 'Phosphorus-free'}
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Flame_reistant': 'Flame retardant', 'Halogen_free': 'Halogen-free', 'Phosphorus_free': 'Phosphorus-free'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® Ace MX54B
Manufacturer:
None
Heat Stabilized, High Tg, Good Toughness at Low Temperatures, Chemical Resistance, Dimensional Stability Close to Aluminum, High Mechanical Performance Over a Broad Temperature Range
Physical Properties
Density
1.78
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, High Tg, Good Toughness at Low Temperatures, Chemical Resistance, Dimensional Stability Close to Aluminum, High Mechanical Performance Over a Broad Temperature Range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NT40 GR60 NL HS
Manufacturer:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.76
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO HA-4350G
Manufacturer:
None
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO HM-4500G
Manufacturer:
乐天化学公司
No Characteristics
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO HM-4300G
Manufacturer:
None
Injection Molding
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound UF00BAS
Manufacturer:
LNP™
Heat Stabilized
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NT40 GR50 NL HS
Manufacturer:
特科米德
Heat stabilized or stable to heat
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound UF00BAS
Manufacturer:
LNP™
Heat Stabilized
Physical Properties
Density
1.64
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A-4160 L
Manufacturer:
None
No Characteristics
Physical Properties
Density
1.75
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 1225 materials | Scroll down for more