HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (34386 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PEI-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10_ULTEM™ Resin 2110R
Manufacturer:
Enhanced flow, Internal mold release, ECO Conforming
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow, Internal mold release, ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2110R
Manufacturer:
Enhanced flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2110
Manufacturer:
Enhanced flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2110
Manufacturer:
Enhanced flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10
Manufacturer:
high flow, internal mold release, enhanced electroplatability, ECO Conforming
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, internal mold release, enhanced electroplatability, ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2110
Manufacturer:
Enhanced flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10
Manufacturer:
high flow
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2110
Manufacturer:
Enhanced flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10_ULTEM™ Resin 2100
Manufacturer:
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10_ULTEM™ Resin 2100F
Manufacturer:
ECO Conforming, US FDA and EU Food Contact Compliant, NSF 51 listing, WRAS certification
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming, US FDA and EU Food Contact Compliant, NSF 51 listing, WRAS certification
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2100
Manufacturer:
standard flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2100F
Manufacturer:
ECO Conforming, US FDA and EU Food Contact Compliant, NSF 51 listing, WRAS certification in recognized colors
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming, US FDA and EU Food Contact Compliant, NSF 51 listing, WRAS certification in recognized colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2100F
Manufacturer:
ECO Conforming, US FDA and EU Food Contact Compliant, NSF 51 listing, WRAS certification in recognized colors
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming, US FDA and EU Food Contact Compliant, NSF 51 listing, WRAS certification in recognized colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10 ULTEM™ Resin 2100
Manufacturer:
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-G10
Manufacturer:
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI-GF10
Manufacturer:
Polymer Resources, Ltd.
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 34386 materials | Scroll down for more