HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2182 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DF006ER
制造商:
LNP
Easy Molding, Mold Release
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DF006ERH
制造商:
LNP™ THERMOCOMP™
Healthcare, Easy Molding, Mold Release
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Healthcare, Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DF0069P
制造商:
LNP™
Exceptional Processing
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Exceptional Processing
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DF006ER
制造商:
LNP
Easy Molding, Mold Release
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DF006LXN
制造商:
LNP™
Low Extractables
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DF006
制造商:
LNP™
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound DF006LXN
制造商:
LNP™
Low Extractables
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
D351RCC
制造商:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 40%
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 40%
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound D351RC
制造商:
LNP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound D351RCC
制造商:
LNP
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound D351RC
制造商:
LNP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRILOY™ Compound DF206XXH
制造商:
LNP™
Wear Resistant, Healthcare
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRILOY™ Compound DF206XXH
制造商:
LNP™
Wear Resistant, Healthcare
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Iupilon GSH2030R2 991J
制造商:
三菱工程塑料公司
Low Warpage
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Iupilon EGN2030R2
制造商:
三菱工程塑料公司
Flame retardant, Phosphorus-free
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Iupilon EGN2030KR
制造商:
三菱工程塑料公司
Flame retardant, Phosphorus-free
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EMERGE™ PC 4903
制造商:
None
{'processing': 'Injection Molding', 'special_characteristics': 'Flame retardant'}
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'processing': 'Injection Molding', 'special_characteristics': 'Flame retardant'}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC ECO 2030/200 GF30
制造商:
None
contains recycled material
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PC ECO 2030/500 GF30
制造商:
ALTECH
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound 9F005P
制造商:
None
Exceptional Processing, CLTE close to Aluminum
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Exceptional Processing, CLTE close to Aluminum
Recorded properties are for screening; verify source data and conditions.
Total 2182 materials | Scroll down for more