HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
V0150B
Manufacturer:
NORYL™
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
V0150B
Manufacturer:
NORYL™
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good low temperature impact resistance, damp heat performance, low moisture absorption, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin PX9406P
Manufacturer:
Strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, and dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP1000
Manufacturer:
NORYL™
Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE1X
Manufacturer:
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SE1X
Manufacturer:
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TP1000
Manufacturer:
NORYL™
Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406P
Manufacturer:
Unattended appliance applications such as PCB holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Unattended appliance applications such as PCB holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406P
Manufacturer:
Unattended appliance applications, such as printed circuit board (PCB) holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders where VDE IEC60335 is required
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Unattended appliance applications, such as printed circuit board (PCB) holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders where VDE IEC60335 is required
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX2630F
Manufacturer:
High impact extrusion grade
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406P
Manufacturer:
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406K
Manufacturer:
NORYL™
Flame retardant used is non-halogenated
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant used is non-halogenated
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406P
Manufacturer:
Unattended appliance applications such as PCB holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Unattended appliance applications such as PCB holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406P
Manufacturer:
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-brominated, non-chlorinated flame retardant, VDE certified IEC60335, strong electrical performance, high heat resistance, Low Warpage, low moisture absorption, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX2630
Manufacturer:
NORYL™
Hydrolytically Stable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin PX9406
Manufacturer:
Flame retardant
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406
Manufacturer:
NORYL™
Flame retardant
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406K
Manufacturer:
NORYL™
Flame retardant used is non-halogenated
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant used is non-halogenated
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406
Manufacturer:
Nonbrominated, nonchlorinated, flame retarded
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nonbrominated, nonchlorinated, flame retarded
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX2630
Manufacturer:
NORYL™
Hydrolytically Stable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more