HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-GF30 RTP 205 MS
Manufacturer:
Injection Molding
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 RAVAMID® A GF30 T BK45
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_RENYCLE A GF3002HR 3039 BK
Manufacturer:
RadiciGroup
Heat stabilized, hydrolysis resistant
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized, hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_RESTRAMID A27 GF30 BK 1A0000
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 BK TK
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 BK45
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_RADILON A RV300 990 GY
Manufacturer:
RadiciGroup
low friction
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low friction
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_RADIFLAM A RV300 HF 9293 GY
Manufacturer:
RadiciGroup
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_RADIFLAM A RV300 AF 830 BR
Manufacturer:
RadiciGroup
Flame retardant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 HSL
Manufacturer:
HSL
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
HSL
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_POLIMID LUB A 30 GF Y10
Manufacturer:
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_PGHSLR30-01
Manufacturer:
Heat stabilized or stable to heat, General Chemical Resistance, Grease Resistance, Hydrolytically Stable, Oil Resistance
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, General Chemical Resistance, Grease Resistance, Hydrolytically Stable, Oil Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_PG30-01GY
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_PG30-01BK
Manufacturer:
General Purpose
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Purpose
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 PENTAMID A GV30 H RC black
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 PENTAMID A GV30 H black
Manufacturer:
Black
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-RG301/PA66-GF30
Manufacturer:
Flame retardant
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 PALMID® R 66 S GF30
Manufacturer:
Pal Plast GmbH
Injection Molding
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-G30
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 OnForce™ LFT NN-30LGF/000 HS SP UV BLACK
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more