HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
AN004-30
Manufacturer:
Excellent appearance, nearly water-clear, chemical resistance, processing capabilities, maintains physical properties with aromatic oils, easy to process, fills intricate molds, thick-wall applications, ISCC certified, circular content, sustainable, reduces consumption of fossil feedstock-based plastics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent appearance, nearly water-clear, chemical resistance, processing capabilities, maintains physical properties with aromatic oils, easy to process, fills intricate molds, thick-wall applications, ISCC certified, circular content, sustainable, reduces consumption of fossil feedstock-based plastics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Eastar™ AN014-30
Manufacturer:
high flow, mold release, excellent appearance and clarity, good physical properties, chemical resistance, ease of melt processing
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, mold release, excellent appearance and clarity, good physical properties, chemical resistance, ease of melt processing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AN004-30
Manufacturer:
Excellent appearance, near water-clear, chemical resistance, processing capabilities, maintains physical properties in aromatic oils, easy to process, flows readily, fills intricate molds, thick-wall applications, certified by ISCC, produced with ISCC certified circular content, enables reduction of fossil feedstock-based plastics, sustainability targets without compromise, fast mover in sustainable consumer products market
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent appearance, near water-clear, chemical resistance, processing capabilities, maintains physical properties in aromatic oils, easy to process, flows readily, fills intricate molds, thick-wall applications, certified by ISCC, produced with ISCC certified circular content, enables reduction of fossil feedstock-based plastics, sustainability targets without compromise, fast mover in sustainable consumer products market
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 2330/500
Manufacturer:
ALTECH
heat stabilised,improved surface appearance,easy release (demoulding)
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,improved surface appearance,easy release (demoulding)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PAT801G50BK10
Manufacturer:
Impact Modified,Improved Surface Appearance semi-crystalline
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified,Improved Surface Appearance semi-crystalline
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PAT7001G50BK11
Manufacturer:
UV Stabilized, Improved Surface Appearance
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV Stabilized, Improved Surface Appearance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA+PPE-X20_Xyron™ AT602
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA+PPE-GF20_Xyron™ AG512
Manufacturer:
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® E540i
Manufacturer:
Celanese
Mineral filled grade with low warp, easy flow and smooth surface appearance.
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mineral filled grade with low warp, easy flow and smooth surface appearance.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® E540i
Manufacturer:
Celanese
Mineral filled grade with low warp, easy flow and smooth surface appearance. Chemical abbreviation according to ISO 1043-1 : LCP
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mineral filled grade with low warp, easy flow and smooth surface appearance. Chemical abbreviation according to ISO 1043-1 : LCP
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53071
Manufacturer:
EVAC
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.92
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53071
Manufacturer:
EVAC
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.92
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53021
Manufacturer:
EVAC
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53070
Manufacturer:
EVAC
Coating, Delivery form, Special Characteristics, Transparent, Features, Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.92
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Coating, Delivery form, Special Characteristics, Transparent, Features, Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53009
Manufacturer:
EVAC
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53008
Manufacturer:
EVAC
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 2044
Manufacturer:
EVAC
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53010
Manufacturer:
EVAC
Heat Sealable, Copolymer
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 1181
Manufacturer:
EVAC
Heat Sealable
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Sealable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53007
Manufacturer:
EVAC
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more