HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2967 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
100AF (POM+PTFE)-Z20
Manufacturer:
High mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound KZL16 - Europe
Manufacturer:
LNP™
Wear Resistant, Dimensional Control
Physical Properties
Density
1.66
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Dimensional Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound KFL25
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound KFL25
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM POM 770/1 GF20 PTFE15
Manufacturer:
improved sliding / wear,heat stabilised
Physical Properties
Density
1.63
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
800 GB 10 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound KFL32R
Manufacturer:
Easy Release, Wear Resistant
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Release, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KEP33
Manufacturer:
Electrically Conductive, Wear Resistant
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
881 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound KEL32
Manufacturer:
LNP™
Electrically Conductive, Internally Lubricated, Wear Resistant
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound KEL32
Manufacturer:
LNP™
Electrically Conductive, Internally Lubricated, Wear Resistant
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound KEL22A
Manufacturer:
LNP™
Electrically Conductive, Internally Lubricated, Wear Resistant
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KAL22M
Manufacturer:
Wear Resistant, Dimensional Control
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Dimensional Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
800 AR 10 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound KAL22XXC - Europe
Manufacturer:
Wear Resistant
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TECACOMP® POM TRM natural 3758
Manufacturer:
Natural Color
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B3 P15 S2 NTLA016 PR341
Manufacturer:
Tenopom
Copolymer
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TECACOMP® POM TRM natural 3758
Manufacturer:
Natural Color
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
800 TFE 18 SI 2
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LOXISTAL POM/PE LU 19002
Manufacturer:
Heat stabilized or stable to heat, Creep Resistance, Tribologic Grade, General Chemical Resistance
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Creep Resistance, Tribologic Grade, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Total 2967 materials | Scroll down for more