HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Etoma™ ET4103
Manufacturer:
Polyalloy Inc.
Increased electrical conductivity, Heat stabilized or stable to Europe, Asia Pacific
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Heat stabilized or stable to Europe, Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2500 TFE 15 FR
Manufacturer:
RTP
Flame retardant
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM WP PC+ABS 5008 TFUV 17009
Manufacturer:
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
274SL10
Manufacturer:
MABLEX
Injection Molding
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
274SL05
Manufacturer:
MABLEX
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2503 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM WP PC+ABS 5005 TFUV 16151
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOY SG5009FA
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LATER 4-V0
Manufacturer:
{'molding_shrinkage_parallel': '1.6 %', 'molding_shrinkage_normal': '1.6 %', 'tensile_modulus': '2800 MPa', 'tensile_strength': '50 MPa', 'strain_at_break': '3 %', 'tensile_strength_break': '45 MPa', 'tensile_strain_break': '20 %', 'charpy_impact_strength_23c': '20 kJ/m²', 'charpy_notched_impact_strength_23c': '5 kJ/m²', 'flexural_modulus': None, 'flexural_strength': None, 'charpy_impact_notched_23c': '5 kJ/m²', 'melting_point': None, 'tg': None, 'hdt_180': '65 °C', 'hdt_045': '170 °C', 'vicat_softening': '185 °C', 'density': '1420 kg/m³', 'water_absorption': None, 'tensile_strain_at_break': '20 %', 'izod_notched_impact': None}
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'molding_shrinkage_parallel': '1.6 %', 'molding_shrinkage_normal': '1.6 %', 'tensile_modulus': '2800 MPa', 'tensile_strength': '50 MPa', 'strain_at_break': '3 %', 'tensile_strength_break': '45 MPa', 'tensile_strain_break': '20 %', 'charpy_impact_strength_23c': '20 kJ/m²', 'charpy_notched_impact_strength_23c': '5 kJ/m²', 'flexural_modulus': None, 'flexural_strength': None, 'charpy_impact_notched_23c': '5 kJ/m²', 'melting_point': None, 'tg': None, 'hdt_180': '65 °C', 'hdt_045': '170 °C', 'vicat_softening': '185 °C', 'density': '1420 kg/m³', 'water_absorption': None, 'tensile_strain_at_break': '20 %', 'izod_notched_impact': None}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WD000
Manufacturer:
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NOVADURAN 5010G45
Manufacturer:
Notched Impact, Charpy Impact, Flexural Modulus, Flexural Strength, Tensile Modulus, Stress at break, Strain at break, Molding shrinkage, Melt volume-flow rate, Density, Water absorption, Coeff. of linear therm. expansion, Melting temperature, Temp. of deflection under load, Coeff. of linear therm. expansion, Relative permittivity, Dissipation factor, Volume resistivity, Surface resistivity, Electric strength
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Notched Impact, Charpy Impact, Flexural Modulus, Flexural Strength, Tensile Modulus, Stress at break, Strain at break, Molding shrinkage, Melt volume-flow rate, Density, Water absorption, Coeff. of linear therm. expansion, Melting temperature, Temp. of deflection under load, Coeff. of linear therm. expansion, Relative permittivity, Dissipation factor, Volume resistivity, Surface resistivity, Electric strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WDF40
Manufacturer:
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound WDF40RID
Manufacturer:
LNP™
Electrically Conductive, Radar Absorbing, higher flowability, and better warpage control
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing, higher flowability, and better warpage control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WDF40
Manufacturer:
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WDF40RID
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing, higher flowability, better warpage control
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing, higher flowability, better warpage control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TECHNIACE™ TB-1701
Manufacturer:
No Characteristics
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUMAX GN5006FC
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HAB8720FR
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HBG5730FR
Manufacturer:
Flame retardant, Chemical Resistance
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURANEX® 601SA
Manufacturer:
Polyplastics
Low Warpage
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more