HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ColorFast® PBA2000
Manufacturer:
Flame retardant
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO GP-3200G
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURANEX® 304SA
Manufacturer:
Polyplastics
Low Warpage
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PBT+ABS A 2020/620 GF 20 UV
Manufacturer:
ALTECH
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUMAX HR5107
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUMAX GP5106FI
Manufacturer:
Flame retardant, High impact or impact modified
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66T B 4030219 MR30 IM
Manufacturer:
high heat stabilised,elastomer modified,easy release (demoulding),low warpage,injection moulding grade,good flow,low water absorption
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,elastomer modified,easy release (demoulding),low warpage,injection moulding grade,good flow,low water absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HiDura™ D0X NT
Manufacturer:
Ascend
low viscosity, excellent flow, low moisture absorption, good chemical resistance, dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low viscosity, excellent flow, low moisture absorption, good chemical resistance, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HiDura™ D3X NT PA612
Manufacturer:
Ascend
high abrasion resistance, ductility, low moisture absorption, good chemical resistance, dimensional stability, high impact resilience
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high abrasion resistance, ductility, low moisture absorption, good chemical resistance, dimensional stability, high impact resilience
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HiDura™ D1X NT PA612
Manufacturer:
Ascend
low moisture absorption, good chemical resistance, dimensional stability and high impact resilience
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low moisture absorption, good chemical resistance, dimensional stability and high impact resilience
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
QFC0AI PA610-GF50
Manufacturer:
LNP™ THERMOCOMP™
high modulus, high impact, low dielectric constant, low moisture absorption, good dimensional stability, good chemical resistance
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high modulus, high impact, low dielectric constant, low moisture absorption, good dimensional stability, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RADILON MIXLOY D 32CPA100 100 NT (PA610+ABS)-MD
Manufacturer:
High viscosity injection moulding grade
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RADILON MIXLOY D CPA100K 100 NT (PA610+ABS)-MD
Manufacturer:
Heat stabilized
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Ultramid® T KR 4355 G5 LS BK23189
Manufacturer:
High toughness, stiffness and strength, low water absorption, high melting point (295 °C), good laser markability
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High toughness, stiffness and strength, low water absorption, high melting point (295 °C), good laser markability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66T B 4030/219 MR30 IM
Manufacturer:
high heat stabilised,elastomer modified,easy release (demoulding),low warpage,injection moulding grade,good flow,low water absorption
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat stabilised,elastomer modified,easy release (demoulding),low warpage,injection moulding grade,good flow,low water absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NN-50GF/000EM L
Manufacturer:
Notched Impact, Tensile Modulus, Tensile Strength, Elongation at Break, Compressive Strength, Flexural Modulus, Flexural Strength, Rockwell Hardness, Izod Impact, Coefficient of Thermal Expansion, Volume Resistivity, Water Absorption, Density
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Notched Impact, Tensile Modulus, Tensile Strength, Elongation at Break, Compressive Strength, Flexural Modulus, Flexural Strength, Rockwell Hardness, Izod Impact, Coefficient of Thermal Expansion, Volume Resistivity, Water Absorption, Density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KRE1121C
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA612 HiDura™ D1XI2J BK0842
Manufacturer:
Low moisture absorption, good chemical resistance, dimensional stability, high impact resistance
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, good chemical resistance, dimensional stability, high impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HiDura™ D1XI2J BK0842
Manufacturer:
Low moisture absorption, good chemical resistance, dimensional stability, high impact resistance
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, good chemical resistance, dimensional stability, high impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HiDura™ D1XA NT
Manufacturer:
Ascend
low moisture absorption, good chemical resistance, dimensional stability, high impact resilience
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low moisture absorption, good chemical resistance, dimensional stability, high impact resilience
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more