HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (766 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LX70T45
Manufacturer:
SIVERAS
High impact or impact modified
Physical Properties
Density
1.75
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® S475
Manufacturer:
Super High Flow, High heat Resistance and Low Warp for Thin Parts
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Super High Flow, High heat Resistance and Low Warp for Thin Parts
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® MT®4350
Manufacturer:
Flame retardant, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® S475
Manufacturer:
Super High Flow, High heat Resistance and Low Warp for Thin Parts
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Super High Flow, High heat Resistance and Low Warp for Thin Parts
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® MT®1345
Manufacturer:
Flame retardant, Light stabilized or stable to light, Hydrolytically Stable
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Light stabilized or stable to light, Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® MT®4350
Manufacturer:
Celanese
Flame retardant, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A530
Manufacturer:
Flame retardant, Light stabilized or stable to light
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Light stabilized or stable to light
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A515
Manufacturer:
Celanese
Flame retardant, Light stabilized or stable to light
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Light stabilized or stable to light
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® MT®1345
Manufacturer:
Inherently flame retardant
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Inherently flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A530
Manufacturer:
Hydrolytically Stable
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A515
Manufacturer:
Celanese
Flame retardant, Light stabilized or stable to light
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Light stabilized or stable to light
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound 9X08403C
Manufacturer:
LNP™
High Temperature, Electrically Conductive, Good Barrier against water and oxygen
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Temperature, Electrically Conductive, Good Barrier against water and oxygen
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SIVERAS® LX70M30H
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A230
Manufacturer:
Increased electrical conductivity, Anti-static, Flame retardant, Light stabilized or stable to light
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, Flame retardant, Light stabilized or stable to light
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® B230
Manufacturer:
Increased electrical conductivity, Anti-static, Flame retardant, Light stabilized or stable to light
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, Flame retardant, Light stabilized or stable to light
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® B230
Manufacturer:
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A435 (LCP+PTFE)-GX35
Manufacturer:
Best High Current Arc Ignition (HAI) performance. Glass/PTFE filled.
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Best High Current Arc Ignition (HAI) performance. Glass/PTFE filled.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A625
Manufacturer:
Celanese
Good wear characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good wear characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3485-1
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® A625 LCP-CD25
Manufacturer:
Celanese
Good wear characteristics, flame retardant, light stabilized or stable to light
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good wear characteristics, flame retardant, light stabilized or stable to light
Recorded properties are for screening; verify source data and conditions.
Total 766 materials | Scroll down for more