HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1334 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
83 CP/80 PA12-X
Manufacturer:
High impact or impact modified, Thermally Conductive
Physical Properties
Density
2.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DuraForm® ProX® HST Composite PA12-X
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3020 CX1
Manufacturer:
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 620-MF PA12-MF
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DAIAMID® L1965J PA12-P
Manufacturer:
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DuraForm® HST Composite PA12-X
Manufacturer:
Additive Manufacturing
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Additive Manufacturing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 620-MF PA12-MF
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® X7293 BK 9.7507 PA12-I
Manufacturer:
High viscosity, plasticized, impact modified, heat- and light-stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, plasticized, impact modified, heat- and light-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® X7293 PA12-I
Manufacturer:
Evonik Operations GmbH
High viscosity, plasticized, impact modified, heat- and light-stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, plasticized, impact modified, heat- and light-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® X7393 NC PA12-I
Manufacturer:
Evonik Operations GmbH
High viscosity, plasticized, impact modified, heat- and light stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, plasticized, impact modified, heat- and light stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® X7293 PA12-I
Manufacturer:
Evonik Operations GmbH
high viscosity, plasticized, impact modified, heat- and light-stabilized
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high viscosity, plasticized, impact modified, heat- and light-stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L2123 PA12-I
Manufacturer:
Evonik Operations GmbH
High melt viscosity, optimized cold temperature impact resistance, good dimensional control during pipe extrusion, exceptional impact strength, low coefficient of friction, good chemical resistance
Physical Properties
Density
0.86
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High melt viscosity, optimized cold temperature impact resistance, good dimensional control during pipe extrusion, exceptional impact strength, low coefficient of friction, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L2123 PA12-I
Manufacturer:
No Characteristics
Physical Properties
Density
0.86
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L-R7-MHI BK PA12-I
Manufacturer:
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L-R7-MHI BK PA12-I
Manufacturer:
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L-R3-MHI BK PA12-I
Manufacturer:
Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat Delivery form stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L-R3-MHI BK PA12-I
Manufacturer:
Plasticized, impact resistance, heat and light-stabilized, antistatic, fast and even form filling
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Plasticized, impact resistance, heat and light-stabilized, antistatic, fast and even form filling
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MA 4411 BLACK
Manufacturer:
Rilsamid®
Profile Extrusion, Other Extrusion, High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or Delivery form stable to heat
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Profile Extrusion, Other Extrusion, High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or Delivery form stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AESN BLACK P202 T6L
Manufacturer:
Rilsamid®
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LV-65H SST natural
Manufacturer:
EMS-GRIVORY
Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Total 1334 materials | Scroll down for more