HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1445 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
AUT200AR
Manufacturer:
High flow, low level of transparent mold release, very low outgassing and plateout
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, low level of transparent mold release, very low outgassing and plateout
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AUT230
Manufacturer:
ULTEM™
Transparent, Very low outgassing and plateout
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, Very low outgassing and plateout
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AUT200
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AUT200
Manufacturer:
ULTEM™
Transparent, High flow
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, High flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AUT195M
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ATX200F
Manufacturer:
ULTEM™
High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant.
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AUR200G0
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin ATX200R
Manufacturer:
High flow Polyetherimide blend with internal mold release. ECO Conforming
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow Polyetherimide blend with internal mold release. ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ATX200R
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 9011
Manufacturer:
Transparent, high flow
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3310TD
Manufacturer:
ULTEM™
filled, near infra-red transparent
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
filled, near infra-red transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9085
Manufacturer:
ULTEM™
Flame retardant, Heat stabilized or stable to heat, Opaque
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3310TD
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ATX200
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9011
Manufacturer:
ULTEM™
Transparent, high flow
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1110
Manufacturer:
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming.
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1110
Manufacturer:
ULTEM™
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming.
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1100F
Manufacturer:
ULTEM™
Standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant.
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010
Manufacturer:
unreinforced amorphous polyetherimide, high glass transition temperature, improved flow, excellent mechanical, electrical and dimensional properties, very good chemical resistance, inherently flame retardant, RoHS compliant, halogen free, transparent amber colored, aerospace applications
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide, high glass transition temperature, improved flow, excellent mechanical, electrical and dimensional properties, very good chemical resistance, inherently flame retardant, RoHS compliant, halogen free, transparent amber colored, aerospace applications
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1010R
Manufacturer:
ULTEM™
unreinforced amorphous polyetherimide (PEI) resin
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide (PEI) resin
Recorded properties are for screening; verify source data and conditions.
Total 1445 materials | Scroll down for more