HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (47468 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-GF33 Celanese
Manufacturer:
Heat stabilized
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF33_CELANYL® A2 W GF33 NC 11021B
Manufacturer:
Natural Color
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 LGF-1030 BK 010-7
Manufacturer:
Xencor™
High impact or impact modified, Heat stabilized or stable to Regional Availability heat
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to Regional Availability heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Vydyne® R530HR BK652
Manufacturer:
Ascend
Heat-stabilized, chemical resistant, fatigue resistant
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat-stabilized, chemical resistant, fatigue resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Vydyne® RF006EU
Manufacturer:
UV stabilized
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UV stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Vydyne® R530H BK08
Manufacturer:
Ascend
Heat-stabilized, General purpose
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat-stabilized, General purpose
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_Vydyne® A 30 GF NT WR
Manufacturer:
standard flow, 30% glass-fiber reinforced
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow, 30% glass-fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Tislamid® B 30D03 K05 R01
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Tislamid® B 30D03 K04 R01
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 7750 T GF 30
Manufacturer:
Dry impact resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dry impact resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Ter Plastics
Manufacturer:
Stiff and tough moulding parts
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Stiff and tough moulding parts
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 6.6 7510 GF 30 H UV
Manufacturer:
Medium viscosity standard grade with 30% glass fibre reinforcement as well as heat stabilization and UV stabilization
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity standard grade with 30% glass fibre reinforcement as well as heat stabilization and UV stabilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 6.6 7510 GF 30
Manufacturer:
high rigidity, good heat resistance
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high rigidity, good heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 6.6 7530 GF30
Manufacturer:
heat and hydrolysis resistant
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat and hydrolysis resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 7500 GF 30 H
Manufacturer:
Heat stabilized
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 TEREZ® PA 6.6 7500 GF 30
Manufacturer:
Medium-viscosity standard quality, good flowability, good toughness and bright natural colour
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium-viscosity standard quality, good flowability, good toughness and bright natural colour
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 7510 GF 30 HY
Manufacturer:
Hydrolysis stabilisation
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis stabilisation
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30_TECHNYL PURE A 219E1 V30 BK
Manufacturer:
TECHNYL
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Taromid A 280 H G6 X0
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF30 Starflam® RF0069
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 47468 materials | Scroll down for more