HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2764 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
COMTUF 462 PET-(GF+MX)
制造商:
None
No Characteristics
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VYPET VNT 840 PET-(GF+MX)40
制造商:
None
Heat stabilized
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Rynite® FR531 NC010 PET-(GF+MD)45 FR(17)
制造商:
塞拉尼斯
Excellent balance of strength and stiffness, dimensional stability, creep resistance, heat resistance, high surface gloss, good inherent electrical properties at elevated temperature, excellent flow properties
Physical Properties
Density
1.83
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent balance of strength and stiffness, dimensional stability, creep resistance, heat resistance, high surface gloss, good inherent electrical properties at elevated temperature, excellent flow properties
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Rynite® FR335 BK507 PET-(GF+MD)35 FR(30+17)
制造商:
赛兰
Flame retardant
Physical Properties
Density
1.66
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PT70 KK45 NL XA20 0B PET-(GF+MD)45
制造商:
None
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.83
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Rynite® FR335 NC010 PET-(GF+MD)35 FR(30+17)
制造商:
赛兰尼斯
Injection Molding
Physical Properties
Density
1.67
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RENATUS® BLR6001MZ PET-(GF+MX)30
制造商:
None
Low Warpage
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VYPET VNT 835 PET-(GF+MX)35
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
IMPET® 830R PET-(GF+MD)35
制造商:
塞拉尼斯
Injection Molding
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
4PET 9L32320 HL PET-(GF+GB)20
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1800-8449
制造商:
卢沃科姆
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VYPET VNT 325 PET-(GF+MX)25
制造商:
None
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
IMPET® 830R PET-(GF+MD)35
制造商:
None
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VYPET VNT 335 PET-(GF+MX)35
制造商:
None
No Characteristics
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PRECITE® E ICF 20 black (7428) PET-CF20
制造商:
None
Regional Availability Tribologic Grade
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUPOX TE5006F (PET+PC)
制造商:
None
No Characteristics
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
1105 TFE 15 (PET+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
C5210 000000 (PET+PA46)-I-MX15
制造商:
Pocan
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
C1206 000000
制造商:
普奥安
Injection Molding, Unreinforced, Improved Impact ISO 1043 (PET+PC)-I
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Unreinforced, Improved Impact ISO 1043 (PET+PC)-I
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VNT 215 (PET+PBT)-GF15
制造商:
None
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 2764 materials | Scroll down for more