HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound REL22 (PA66+PTFE)-CF10
Manufacturer:
LNP™
Wear Resistant, Electrically Conductive
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound REL42 (PA66+PTFE)-CF20
Manufacturer:
LNP™
Electrically Conductive, Internally Lubricated, Wear Resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound REL33 (PA66+PTFE)-CF15
Manufacturer:
Electrically Conductive, Wear Resistant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
282 TFE 15 (PA66+PTFE)-CF15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound RCP36 - Americas (PA66+PTFE)-CF30
Manufacturer:
Electrically Conductive, Wear Resistant
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound RCL36S (PA66+PTFE)-CF30
Manufacturer:
Electrically Conductive, Wear Resistant, Heat Stabilized
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
283 TFE 10 (PA66+PTFE)-CF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RCL26 (PA66+PTFE)-CF30
Manufacturer:
LNP™ LUBRICOMP™
Wear Resistant, Electrically Conductive
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
283 TFE 15 (PA66+PTFE)-CF20
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PA66 910/1.1 CF30 PTFE15
Manufacturer:
electrically conductive,reduced surface resistivity,improved sliding / wear,heat stabilised
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,improved sliding / wear,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PTFE-CF30
Manufacturer:
Lubricants
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 281 TFE 20 (PA66+PTFE)-CF10
Manufacturer:
Injection Molding
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AKROMID® A3 ICF 30 TM black 7019
Manufacturer:
Injection Molding Tribologic Grade
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
281 TFE 10 (PA66+PTFE)-CF10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PA66 910/1.1 CF10 PTFE10IM
Manufacturer:
improved sliding / wear,heat stabilised,electrically conductive,reduced surface resistivity,impact modified
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised,electrically conductive,reduced surface resistivity,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PTFE-CF10_ALCOM PA66 9101.1 CF10 PTFE10
Manufacturer:
improved sliding / wear,heat stabilised,electrically conductive,reduced surface resistivity
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,heat stabilised,electrically conductive,reduced surface resistivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RX05489
Manufacturer:
Increased electrical conductivity
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
200 AR 20 TFE 10 (PA66+PTFE)-AF20
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Titalon 2250AF (PA66+PTFE)-AF
Manufacturer:
Injection Molding Low Warpage, Tribologic Grade
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Warpage, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PTFE-AF15_RTP 200 AR 15 TFE 15
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more