HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PX9406
Manufacturer:
NORYL™
Nonbrominated, nonchlorinated, flame retarded
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nonbrominated, nonchlorinated, flame retarded
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX9406
Manufacturer:
NORYL™
Nonbrominated, nonchlorinated, flame retarded
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nonbrominated, nonchlorinated, flame retarded
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1390
Manufacturer:
NORYL™
Excellent electrical properties, easy processability, high heat resistance, good dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent electrical properties, easy processability, high heat resistance, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1185
Manufacturer:
high heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1180
Manufacturer:
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1181
Manufacturer:
NORYL™
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1390
Manufacturer:
NORYL™
excellent electrical properties, easy processability, high heat resistance, good dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent electrical properties, easy processability, high heat resistance, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1181
Manufacturer:
NORYL™
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1390
Manufacturer:
NORYL™
excellent electrical properties, easy processability, high heat resistance, good dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent electrical properties, easy processability, high heat resistance, good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
NORYL™
Non-reinforced blend, very low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, very low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
NORYL™
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1112
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1180
Manufacturer:
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
NORYL™
Non-reinforced blend, low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin PX1185
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1134
Manufacturer:
NORYL™
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX1112
Manufacturer:
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin PX1134
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PX0888
Manufacturer:
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more