Core Technology
Micro-Channel Cold Plates
Micro-Channel Cold Plates
TL;DR:Break the limits of traditional machining with SLM 3D printing. Heat transfer area increased by 300% to achieve ultra-low thermal resistance.
Limitations of Traditional Methods
Traditional CNC cold plates are limited by tool paths, causing hot spots and hard-to-clean blind holes.
3D Printing Solutions
Topology-optimized 3D printed continuous microchannels eliminate dead zones and assembly gaps. Thermal resistance < 0.01 K/W.
Core Engineering Data
Pressure Drop (ΔP)
-30%
Heat Transfer Area
+300%
Thermal Resistance
< 0.01 K/W
Materials & DfAM Specs
| Parameter | Recommended Value |
|---|---|
| Min Channel/Wall (DfAM) | 0.2 mm |
| Surface Roughness (Ra) | 3 - 5 μm |
| Recommended Materials | AlSi10Mg, CuCrZr |