Impact-modified, high modulus PA66 resin

Vydyne® 49H NT

生产商:未记录

已录入物性

记录日期:2026-11-08

指标数值单位
密度1.11g/cm³
拉伸强度75.0MPa
拉伸模量2700.0MPa
断裂伸长率5.2%
弯曲强度81.0MPa
弯曲模量23.0MPa
缺口冲击强度23.0kJ/m²
热变形温度 1.8MPa1.8°C
热变形温度 0.45MPa0.45°C
阻燃等级{'HB': 'UL 94 Flame rating HB - UL 94 Thickness tested 0.75 mm', 'GWFI': 'Glow Wire Flammability Index (GWFI) 725 °C IEC 60695-2-12 GWFI - thickness tested (1) 0.75 mm - Glow Wire Flammability Index (GWFI) 750 °C IEC 60695-2-12 GWFI - thickness tested (2) 1.5 mm - Glow Wire Flammability Index (GWFI) 700 °C IEC 60695-2-12 GWFI - thickness tested (3) 3 mm - Glow Wire Ignition Temperature (GWIT) 750 °C IEC 60695-2-13 GWIT - thickness tested (1) 0.75 mm - Glow Wire Ignition Temperature (GWIT) 775 °C IEC 60695-2-13 GWIT - thickness tested (2) 1.5 mm - Glow Wire Ignition Temperature (GWIT) 725 °C IEC 60695-2-13 GWIT - thickness tested (3) 3 mm'}—

数据库未完整记录测试标准、试样状态及来源授权。数值仅供初筛,采购或设计决策前请向原厂核对。

型号使用信息核验

当前记录未提供经核实的型号级储存、干燥、设备设定和用途资料。请向生产商索取该型号最新加工指南和安全数据表,确认以下信息后再制定生产工艺。

储存
核对包装、温湿度、储存期限和开封后的管理要求。
干燥
核对是否需要干燥、温度、时间、露点和目标含水量。
设备调试
核对机筒和模具温度、注射条件、停留时间、清机及停机安全要求。
材料应用用途
核对制造商对该牌号的适用工艺、应用限制及相关认证。