HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
FP5140
Manufacturer:
NORYL™
High flow, Good rheological properties, High heat resistance, Hydrolysis resistance, Very low density
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, Good rheological properties, High heat resistance, Hydrolysis resistance, Very low density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM6101
Manufacturer:
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ENG265F
Manufacturer:
Hydrolytically Stable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FNH2160
Manufacturer:
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FP3060
Manufacturer:
NORYL™
Good dimensional stability, high flow, good rheological properties, high heat resistance, hydrolysis resistance, very low density
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good dimensional stability, high flow, good rheological properties, high heat resistance, hydrolysis resistance, very low density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM6100
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ENG265
Manufacturer:
NORYL™
Hydrolytically Stable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EN265
Manufacturer:
NORYL™
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EX130
Manufacturer:
NORYL™
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM6100
Manufacturer:
NORYL™
Non-reinforced blend
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM6100
Manufacturer:
Balance of flow/heat/impact, dimensional stability, along with paint adhesion
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Balance of flow/heat/impact, dimensional stability, along with paint adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EM6100
Manufacturer:
Balance of flow/heat/impact, dimensional stability, along with paint adhesion
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Balance of flow/heat/impact, dimensional stability, along with paint adhesion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN9003G
Manufacturer:
NORYL™
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN9003G
Manufacturer:
NORYL™
Impact resistance, surface aesthetics, low warpage, dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact resistance, surface aesthetics, low warpage, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EFN4230
Manufacturer:
No Characteristics
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN9003G
Manufacturer:
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CRX1005
Manufacturer:
NORYL™
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BN9003G
Manufacturer:
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good balance of impact resistance and surface aesthetics, low warpage, dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CRX1005
Manufacturer:
NORYL™
Injection Molding, General Chemical Resistance, Hydrolytically Stable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, General Chemical Resistance, Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin BN9003G
Manufacturer:
Polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more