HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ZM3640
Manufacturer:
Mineral reinforced, Non-brominated, Non-chlorinated flame retardant, High heat resistance, Low warpage, Good dimensional stability
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mineral reinforced, Non-brominated, Non-chlorinated flame retardant, High heat resistance, Low warpage, Good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HS2000X
Manufacturer:
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ZM3242C
Manufacturer:
NORYL™
super low warpage, non-brominated, non-chlorinated flame retardant
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
super low warpage, non-brominated, non-chlorinated flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ THERMOCOMP™ Compound ZKC04 (PPE+PS)-MF20
Manufacturer:
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility, Good Thermal Performance
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility, Good Thermal Performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ZM3640
Manufacturer:
Mineral reinforced, Non-brominated, Non-chlorinated flame retardant, High heat resistance, Low warpage, Good dimensional stability
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mineral reinforced, Non-brominated, Non-chlorinated flame retardant, High heat resistance, Low warpage, Good dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound ZKC06
Manufacturer:
LNP™
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility, Good Thermal Performance
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility, Good Thermal Performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound ZKC04
Manufacturer:
LNP™
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility and Good Thermal Performance
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility and Good Thermal Performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HS2000X
Manufacturer:
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrical performance, dimensional stability, very low moisture absorption, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ZM3242
Manufacturer:
NORYL™
Super low warpage, Non-brominated, non-chlorinated flame retardant
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Super low warpage, Non-brominated, non-chlorinated flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound ZKC06
Manufacturer:
LNP™
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility, Good Thermal Performance
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Dielectric Constant (Dk), Extremely Low Dissipation Factor (Df), Good Ductility, Good Thermal Performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ZM3242C
Manufacturer:
NORYL™
super low warpage, non-brominated, non-chlorinated flame retardant
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
super low warpage, non-brominated, non-chlorinated flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FARADEX™ Compound ZX93134
Manufacturer:
LNP™
Electrically Conductive, EMI/RFI shielding
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, EMI/RFI shielding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FE1740PW
Manufacturer:
NORYL™
Hydrolytically Stable
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NHP6011
Manufacturer:
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FE1740PW
Manufacturer:
Hydrolytically Stable, FDA food contact compliant, NSF/ANSI 61*, ACS, WRAS, KTW, and W270 listed for global potable water use
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable, FDA food contact compliant, NSF/ANSI 61*, ACS, WRAS, KTW, and W270 listed for global potable water use
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FE1740PW
Manufacturer:
NORYL™
Hydrolytically Stable
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FE1740PW
Manufacturer:
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XYRON™ X1712
Manufacturer:
Low Warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin NHP6011
Manufacturer:
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, very low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FE1740PW
Manufacturer:
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long-term hydrolytic stability, very low moisture absorption, heat/hot water resistance
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more