HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LUMAX GP5200B (PBT+ABS)-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® ET UV510
Manufacturer:
high viscosity, easy release, very low plate-out, special grade for the coextrusion of Makrolon ET base resins, solid sheet, multi wall sheets / profiles
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high viscosity, easy release, very low plate-out, special grade for the coextrusion of Makrolon ET base resins, solid sheet, multi wall sheets / profiles
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ET UV510 RE_AG
Manufacturer:
Makrolon®
high viscosity, easy release, very low plate-out, special grade for the coextrusion of Makrolon ET base resins, solid sheet, multi wall sheets / profiles
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high viscosity, easy release, very low plate-out, special grade for the coextrusion of Makrolon ET base resins, solid sheet, multi wall sheets / profiles
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound DX04490R
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound DX11411R
Manufacturer:
LNP™
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
IFX121RA
Manufacturer:
infra-red absorbing, low viscosity
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
infra-red absorbing, low viscosity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
IFX121RA
Manufacturer:
infra-red absorbing, low viscosity
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
infra-red absorbing, low viscosity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Copolymer EXL1330
Manufacturer:
LEXAN™
{'Processing/Physical Characteristics': 'Melt volume-flow rate, MVR: 9 cm³/10min, Melt Flow Index, MFI: 10 g/10min', 'Mechanical properties': 'Tensile Modulus: 2100 MPa, Yield stress: 55 MPa, Yield strain: 5 %, Stress at break: 56 MPa, Strain at break: 50 %, Flexural modulus: 2100 MPa, Charpy impact strength, +23°C, 3mm: kJ/m², Charpy notched impact strength, +23°C, 3mm: 75 kJ/m², Charpy notched impact strength, -30°C, 3mm: 60 kJ/m², Izod impact strength, +23°C: kJ/m², Izod notched impact strength, +23°C, 3mm: 70 kJ/m², Izod notched impact strength, -30°C, 3mm: 55 kJ/m², Ball indentation hardness: 90 MPa', 'Thermal properties': 'Vicat softening temperature, B: 143 °C, Vicat softening temperature, 120°C/h 50N: 145 °C, Burning behav. at thickness h: HB class, Glow Wire Flammability Index (GWFI): 960 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (1): 875 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (3): 875 °C', 'Other properties': 'Water absorption: 0.35 %, Sim. to ISO 62, Humidity absorption: 0.15 %, Sim. to ISO 62, Density: 1180 kg/m³, ISO 1183, Density: 1180 kg/m³, ASTM D 792'}
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Processing/Physical Characteristics': 'Melt volume-flow rate, MVR: 9 cm³/10min, Melt Flow Index, MFI: 10 g/10min', 'Mechanical properties': 'Tensile Modulus: 2100 MPa, Yield stress: 55 MPa, Yield strain: 5 %, Stress at break: 56 MPa, Strain at break: 50 %, Flexural modulus: 2100 MPa, Charpy impact strength, +23°C, 3mm: kJ/m², Charpy notched impact strength, +23°C, 3mm: 75 kJ/m², Charpy notched impact strength, -30°C, 3mm: 60 kJ/m², Izod impact strength, +23°C: kJ/m², Izod notched impact strength, +23°C, 3mm: 70 kJ/m², Izod notched impact strength, -30°C, 3mm: 55 kJ/m², Ball indentation hardness: 90 MPa', 'Thermal properties': 'Vicat softening temperature, B: 143 °C, Vicat softening temperature, 120°C/h 50N: 145 °C, Burning behav. at thickness h: HB class, Glow Wire Flammability Index (GWFI): 960 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (1): 875 °C, Glow Wire Ignition Temperature (GWIT) - thickness tested (3): 875 °C', 'Other properties': 'Water absorption: 0.35 %, Sim. to ISO 62, Humidity absorption: 0.15 %, Sim. to ISO 62, Density: 1180 kg/m³, ISO 1183, Density: 1180 kg/m³, ASTM D 792'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FPC 724 HF
Manufacturer:
Tensile Modulus, Tensile Strength at Yield, Elongation at Yield, Elongation at Break, Flexural Modulus, Flexural Strength, Izod Impact notched, UL 94 Flame rating, Coefficient of Thermal Expansion, DTUL @ 264 psi, Max. Service Temp., Intermittent, Water Absorption, Density
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tensile Modulus, Tensile Strength at Yield, Elongation at Yield, Elongation at Break, Flexural Modulus, Flexural Strength, Izod Impact notched, UL 94 Flame rating, Coefficient of Thermal Expansion, DTUL @ 264 psi, Max. Service Temp., Intermittent, Water Absorption, Density
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC A 1000/608 WT1005-17LWA
Manufacturer:
ALTECH
laser optimisation, easy release (demoulding), good flow, processing stabilised, injection moulding grade, laser absorbing
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
laser optimisation, easy release (demoulding), good flow, processing stabilised, injection moulding grade, laser absorbing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CM 506
Manufacturer:
General purpose, Vicat 130°C ISO 1043
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose, Vicat 130°C ISO 1043
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C MC 3650
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CM 206
Manufacturer:
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CM 506 U
Manufacturer:
Light stabilized or stable to light, U.V. stabilized or stable to weather
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Light stabilized or stable to light, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RMMB 40300
Manufacturer:
Halogen-free flame retardant ABS-PC blend
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Halogen-free flame retardant ABS-PC blend
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
SCHULABLEND® (PC/ABS) M/MB 5
Manufacturer:
Increased impact strength and heat resistance
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased impact strength and heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CM 406
Manufacturer:
General purpose, Vicat 120°C ISO 1043
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose, Vicat 120°C ISO 1043
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CM 406 U
Manufacturer:
Vicat 120°C, UV Stabilized ISO 1043
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Vicat 120°C, UV Stabilized ISO 1043
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC/ABS M/MB 5 GF 5
Manufacturer:
Increased heat resistance
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC+AWL 750/20.1 WT1407-04LB
Manufacturer:
Heat stabilized or stable to heat, Light Blocking
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Light Blocking
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more