HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Eastalloy™ DA003-8999K
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9X20038
Manufacturer:
Increased flow, improved release, easy processing, high impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased flow, improved release, easy processing, high impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INFINO WX-7010
Manufacturer:
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HSC7079Z
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C RC 3012
Manufacturer:
General purpose, Vicat 120°C ISO 1043
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose, Vicat 120°C ISO 1043
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ LDS 3720
Manufacturer:
Improved Impact, Halogen free, Laser Direct Structuring (LDS)
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Impact, Halogen free, Laser Direct Structuring (LDS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CP 200 LT
Manufacturer:
Injection Molding, High Flow, Vicat 112°C, UV Stabilized
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, High Flow, Vicat 112°C, UV Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound NXCY620
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
COLORCOMP™ Compound NX06514
Manufacturer:
LNP™
non-chlorinated, non-brominated flame retardant, improved heat resistance, balanced flow and impact
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-chlorinated, non-brominated flame retardant, improved heat resistance, balanced flow and impact
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
COLORCOMP™ Compound N1000E
Manufacturer:
LNP™
Excellent Flow, Impact, High Heat Resistance, Low Temperature Ductility
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent Flow, Impact, High Heat Resistance, Low Temperature Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CYCOLOY™ FR Resin CX2244ME
Manufacturer:
medium flow, non-chlorinated/brominated flame retardant grade, improved chemical resistance, good for thin wall applications and hospital/medical equipment
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, non-chlorinated/brominated flame retardant grade, improved chemical resistance, good for thin wall applications and hospital/medical equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CYCOLOY™ FR Resin CX2244ME
Manufacturer:
medium flow, non-chlorinated/brominated flame retardant grade, improved chemical resistance, good for thin wall applications and hospital/medical equipment
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, non-chlorinated/brominated flame retardant grade, improved chemical resistance, good for thin wall applications and hospital/medical equipment
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CF 447
Manufacturer:
Flame Retardant
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LEXAN™ FR Resin JK2500
Manufacturer:
Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm, Non-Brominated, Non-Chlorinated Flame Retardant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm, Non-Brominated, Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 227 H SI 2 Z (PA66+SI)-MX40
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MF20_LUMID GP3200A(W)
Manufacturer:
General Purpose
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General Purpose
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N30 ABS
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MAIP SRL
Manufacturer:
LINX 30 M4 PC
Metallic effect
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Metallic effect
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM AWL 113/15 WT1013-12LB (ABS+PC)-X15
Manufacturer:
highly reflective,opaque,high heat stabilised
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,high heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAREX WR-9300HF
Manufacturer:
ASA
Injection Molding
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more