HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1900
Manufacturer:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N190X
Manufacturer:
NORYL™
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytical stability
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend, non-brominated, non-chlorinated flame retardant, strong electrical performance, low moisture absorption, dimensional stability, hydrolytical stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NORYL™ Resin N190
Manufacturer:
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
FR capability, enhanced dimensional stability, high heat resistance, low moisture absorption, good electrically insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N190
Manufacturer:
NORYL™
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1900
Manufacturer:
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1250
Manufacturer:
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, Thin wall FR capability, Enhanced dimensional stability, High heat resistance, Low moisture absorption, Good electrical insulating properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
Improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
N1050
Manufacturer:
NORYL™
improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved dimensional stability and flow, non-brominated, non-chlorinated flame retardant, very low moisture absorption, excellent dimensional stability, good electrical properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FNH2160
Manufacturer:
NORYL™
Foamable, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Foamable, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EN185
Manufacturer:
NORYL™
excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EN265
Manufacturer:
NORYL™
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FNH2160
Manufacturer:
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FNH2160
Manufacturer:
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
foamable blend, fast cycle time, improved processing, good dimensional stability, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EN265
Manufacturer:
NORYL™
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent impact strength, very low moisture absorption, good dimensional stability, great machinability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310
Manufacturer:
NORYL™
Injection moldable, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection moldable, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
7310
Manufacturer:
NORYL™
Non-reinforced blend, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
731S
Manufacturer:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more