HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1588 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
7310
制造商:
NORYL™
Injection moldable, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection moldable, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
7310
制造商:
NORYL™
Non-reinforced blend, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731S
制造商:
NORYL™
FC EU, FDA food contact compliant and has NSF/ANSI 61, ACS, WRAS, and KTW/W270 listings for selected colors and manufacturing locations
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
FC EU, FDA food contact compliant and has NSF/ANSI 61, ACS, WRAS, and KTW/W270 listings for selected colors and manufacturing locations
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731F
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
7310F
制造商:
诺瑞尔
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731S
制造商:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
BN31
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), good low temperature impact strength, heat resistance, excellent processability, Low warpage, and dimensional stability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS), good low temperature impact strength, heat resistance, excellent processability, Low warpage, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731F
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731S
制造商:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
7310F
制造商:
诺瑞尔
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
7310RC5
制造商:
NORYL™
unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
BN31
制造商:
NORYL™
Low warpage, and dimensional stability, good low temperature impact strength, heat resistance, excellent processability
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low warpage, and dimensional stability, good low temperature impact strength, heat resistance, excellent processability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731F
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731
制造商:
NORYL™
Hydrolytically Stable
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731S
制造商:
NORYL™
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, low moisture absorption, dimensional and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
7310
制造商:
NORYL™
good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731
制造商:
NORYL™
Good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good surface appearance, high ductility, good impact resistance, low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
731
制造商:
NORYL™
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
6390H
制造商:
NORYL™
No Characteristics
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 1588 materials | Scroll down for more