HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX05475
Manufacturer:
LNP
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF002
Manufacturer:
LNP
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF002
Manufacturer:
LNP
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX05475
Manufacturer:
LNP
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX06409
Manufacturer:
LNP™
Easy Molding, Mold Release, Low Extractables, Healthcare
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release, Low Extractables, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX06409
Manufacturer:
LNP™
Easy Molding, Mold Release, Low Extractables, Healthcare
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release, Low Extractables, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DX05477
Manufacturer:
LNP™
Easy Molding, Mold Release
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOTUF™ Compound DF002PSI
Manufacturer:
LNP
Impact Modified, High Flow, Ductile, Good Chemical Resistance
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, High Flow, Ductile, Good Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DF002FVQ
Manufacturer:
LNP™ THERMOCOMP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Adhesion Strength
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Adhesion Strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF002FV
Manufacturer:
LNP
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Surface Aesthetics and Wide Processing Window
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Surface Aesthetics and Wide Processing Window
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DF002FVQ
Manufacturer:
LNP™ THERMOCOMP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Adhesion Strength
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Adhesion Strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF002H
Manufacturer:
LNP
Healthcare
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D151
Manufacturer:
LNP™
High Modulus, Good Surface, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Good Surface, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DF002FV
Manufacturer:
LNP™ THERMOCOMP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Surface Aesthetics and Wide Processing Window
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Good Surface Aesthetics and Wide Processing Window
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DF0029P
Manufacturer:
Injection Molding
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF002ER
Manufacturer:
LNP™
Easy Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D151
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Good Surface, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Good Surface, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D151RC
Manufacturer:
LNP™
High Modulus, Good Surface, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Good Surface, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF002ERH
Manufacturer:
LNP™
Easy Molding, Healthcare, Mold Release
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Healthcare, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DF002ER
Manufacturer:
LNP™ THERMOCOMP™
Easy Molding, Mold Release
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more