HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1370 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
ULTEM™ Resin 2200F - Europe PEI-GF20
制造商:
沙特基础工业公司
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2200 - Asia PEI-GF20
制造商:
沙特基础工业公司
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2200 - Americas PEI-GF20
制造商:
沙特基础工业公司
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
2103 LF PEI-GF20
制造商:
RTP
Injection Molding
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
9400GF PEI-GF20
制造商:
None
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin HU2100 PEI-GF10
制造商:
沙特基础工业公司
Approved Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma Applications irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Approved Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma Applications irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin PW2100
制造商:
沙特基础工业公司
ULTEM PW2100树脂是一种无定形, 不透明的聚醚酰亚胺(PEI)塑料,具有玻璃化转变温度(Tg)为217°C。
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ULTEM PW2100树脂是一种无定形, 不透明的聚醚酰亚胺(PEI)塑料,具有玻璃化转变温度(Tg)为217°C。
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EF004
制造商:
LNP™ THERMOCOMP™
No Characteristics
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin HU2100 PEI-GF10
制造商:
沙特基础工业公司
Amorphous, Creep Resistance, Good Adhesion, Low Smoke
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous, Creep Resistance, Good Adhesion, Low Smoke
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
THERMOCOMP™ Compound EX00781H
制造商:
LNP™
Healthcare
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin PW2100
制造商:
None
Amorphous, opaque, inherently flame retardant
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous, opaque, inherently flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
EF004XXP
制造商:
None
High Modulus, High Strength, Good Dimension Stability and Good Warpage Control
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, High Strength, Good Dimension Stability and Good Warpage Control
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2120 PEI-GF10
制造商:
沙特基础工业公司
耐高温,高强度,高刚度,耐蠕变
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
耐高温,高强度,高刚度,耐蠕变
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2120 PEI-GF10
制造商:
沙特基础工业公司
高流动, 耐高温, 耐蠕变, 不透明
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
高流动, 耐高温, 耐蠕变, 不透明
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2110R - Americas PEI-GF10
制造商:
沙特基础工业公司
Enhanced flow, internal mold release, ECO Conforming
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow, internal mold release, ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2110 - Americas PEI-GF10
制造商:
沙特基础工业公司
enhanced flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2100
制造商:
沙特基础工业公司
ECO Conforming
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2100 - Americas PEI-GF10
制造商:
沙特基础工业公司
standard flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ULTEM™ Resin 2100R - Americas PEI-GF10
制造商:
沙特基础工业公司
standard flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Resin 2100
制造商:
ULTEM™
standard flow
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Total 1370 materials | Scroll down for more