HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5379 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
VYLOPET® EMC618P
Manufacturer:
Fungus Resistance, Low Warpage
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Fungus Resistance, Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NOVADURAN 5308FDV-K2D
Manufacturer:
High Gloss, Low Emission
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss, Low Emission
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NOVADURAN 5810G15
Manufacturer:
Low Warpage
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOX SG3250
Manufacturer:
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KUG1150W
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.7
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KUG1030W
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Pocan® T7391 900044 POS151
Manufacturer:
ISO 1043 (PBT+PET)-GF45
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ISO 1043 (PBT+PET)-GF45
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RamSter PF310G6NT
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Pocan® DP BFN 4230 000000
Manufacturer:
Flame retardant, Halogen-free
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOX SG5300
Manufacturer:
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EPIMIX PBT/PET GFR 30 NC
Manufacturer:
No Characteristics
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TV4 461 KL
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9KL22130
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOX SG5200
Manufacturer:
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
125GF 15 natural (014)
Manufacturer:
CompaDur
{'Relative permittivity': '3.8 - IEC 62631-2-1', 'Relative permittivity (1MHz)': '3.6 - IEC 62631-2-1', 'Volume resistivity': '>1E13 Ohm*m - IEC 62631-3-1', 'Surface resistivity': '1E15 Ohm - IEC 62631-3-2', 'Electric strength': '26 kV/mm - IEC 60243-1', 'Comparative tracking index': '250 - IEC 60112'}
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Relative permittivity': '3.8 - IEC 62631-2-1', 'Relative permittivity (1MHz)': '3.6 - IEC 62631-2-1', 'Volume resistivity': '>1E13 Ohm*m - IEC 62631-3-1', 'Surface resistivity': '1E15 Ohm - IEC 62631-3-2', 'Electric strength': '26 kV/mm - IEC 60243-1', 'Comparative tracking index': '250 - IEC 60112'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VALOX™ FR Resin ENH8530
Manufacturer:
excellent chemical resistance
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PRECITE® K ICF 30 black (7570)
Manufacturer:
Akro-Plastic GmbH
Tribologic Grade
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURANEX® 3106
Manufacturer:
Polyplastics
High Gloss
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUPOX SG5150
Manufacturer:
Injection Molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PB70 NL TD22
Manufacturer:
Flame retardant, High impact or impact modified
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 5379 materials | Scroll down for more