HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1445 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2410 - Americas PEI-GF40
Manufacturer:
enhanced flow
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2400F - Europe PEI-GF40
Manufacturer:
ULTEM™
standard flow
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU2310 PEI-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2400 - Europe PEI-GF40
Manufacturer:
ULTEM™
standard flow
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU2310 PEI-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2107 PEI-GF40
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin PW2300 PEI-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2400 - Europe PEI-GF40
Manufacturer:
Standard flow
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin PW2300 PEI-GF30
Manufacturer:
Flame retardant, Heat stabilized or stable to heat, Opaque
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat, Opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PDXE98480 PEI-GF40
Manufacturer:
No Characteristics
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2410 - Americas PEI-GF40
Manufacturer:
enhanced flow
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PDXE98480
Manufacturer:
LNP™ THERMOCOMP™
No Characteristics
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2400 - Americas PEI-GF40
Manufacturer:
standard flow
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2400 - Americas PEI-GF40
Manufacturer:
Standard flow
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2107 LF PEI-GF40
Manufacturer:
No Characteristics
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU2300 PEI-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU2300 PEI-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin CRS5311 - Europe PEI-GF30
Manufacturer:
Enhanced flow, enhanced chemical resistance to strong acids, bases, aromatics, and ketones
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow, enhanced chemical resistance to strong acids, bases, aromatics, and ketones
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin CRS5301 - Americas PEI-GF30
Manufacturer:
Enhanced chemical resistance to strong acids, bases, aromatics, and ketones
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced chemical resistance to strong acids, bases, aromatics, and ketones
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2300 PEI-GF30
Manufacturer:
Standard flow
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Total 1445 materials | Scroll down for more