HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1445 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200R - Europe PEI-GF20
Manufacturer:
Standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200 - Europe PEI-GF20
Manufacturer:
Standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200R - Americas PEI-GF20
Manufacturer:
standard flow, internal mold release, ECO Conforming
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow, internal mold release, ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200F - Americas PEI-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200F - Europe PEI-GF20
Manufacturer:
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200 - Americas PEI-GF20
Manufacturer:
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200F - Europe PEI-GF20
Manufacturer:
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200 - Asia PEI-GF20
Manufacturer:
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2200 - Americas PEI-GF20
Manufacturer:
standard flow
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2103 LF PEI-GF20
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9400GF PEI-GF20
Manufacturer:
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU2100 PEI-GF10
Manufacturer:
Approved Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma Applications irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Approved Flame retardant, Heat stabilized or stable to heat, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma Applications irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin PW2100
Manufacturer:
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EF004
Manufacturer:
LNP™ THERMOCOMP™
No Characteristics
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU2100 PEI-GF10
Manufacturer:
Amorphous, Creep Resistance, Good Adhesion, Low Smoke
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous, Creep Resistance, Good Adhesion, Low Smoke
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound EX00781H
Manufacturer:
LNP™
Healthcare
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin PW2100
Manufacturer:
Amorphous, opaque, inherently flame retardant
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous, opaque, inherently flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EF004XXP
Manufacturer:
High Modulus, High Strength, Good Dimension Stability and Good Warpage Control
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, High Strength, Good Dimension Stability and Good Warpage Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2120 PEI-GF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 2120 PEI-GF10
Manufacturer:
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 1445 materials | Scroll down for more