HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1445 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
SF2260
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
UF5011S
Manufacturer:
ULTEM™
Enhanced flow, Specialty filtered
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow, Specialty filtered
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MD131AR
Manufacturer:
ULTEM™
Amorphous, Foamable, High Gloss
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous, Foamable, High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MD131AR
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MD131
Manufacturer:
ULTEM™
Transparent, high flow
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MD131A
Manufacturer:
Transparent, enhanced flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Resin PW1000
Manufacturer:
ULTEM™
Excellent mechanical and dimensional properties up to high temperatures and under wet conditions, very good hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical and dimensional properties up to high temperatures and under wet conditions, very good hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Resin PW1000
Manufacturer:
ULTEM™
Excellent mechanical and dimensional properties, high glass transition temperature, hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical and dimensional properties, high glass transition temperature, hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU1110
Manufacturer:
ECO Conforming, biocompatible (ISO 10993 or USP Class VI), food contact compliant, Steam, Gamma, EtO, and E-beam sterilizable
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming, biocompatible (ISO 10993 or USP Class VI), food contact compliant, Steam, Gamma, EtO, and E-beam sterilizable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LTX300A
Manufacturer:
High flow Polyetherimide blend with low toxicity, smoke and flame evolution.
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow Polyetherimide blend with low toxicity, smoke and flame evolution.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HU1110
Manufacturer:
ULTEM™
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change; biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change; biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HU1100
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HU1000E
Manufacturer:
ULTEM™
unreinforced amorphous polyetherimide, high glass transition temperature, biocompatible, excellent mechanical, electrical and dimensional properties, good chemical resistance, inherently flame retardant, RoHS compliant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide, high glass transition temperature, biocompatible, excellent mechanical, electrical and dimensional properties, good chemical resistance, inherently flame retardant, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HU1000
Manufacturer:
ULTEM™
unreinforced amorphous polyetherimide with high glass transition temperature, biocompatible, steam-, hydrogen peroxide-, gamma-, EtO-, UV-C- and E-beam resistance, global food compliance (FDA, CN, EC), excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide with high glass transition temperature, biocompatible, steam-, hydrogen peroxide-, gamma-, EtO-, UV-C- and E-beam resistance, global food compliance (FDA, CN, EC), excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DU319
Manufacturer:
Transparent
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU1010
Manufacturer:
Transparent, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU1000
Manufacturer:
Transparent, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Transparent, Ethylene Oxide (EtO) Sterilization, Steam sterilization, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HU1004
Manufacturer:
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin DH1004
Manufacturer:
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AUT200M
Manufacturer:
ULTEM™
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 1445 materials | Scroll down for more