HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2573 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Desmopan 588 L
Manufacturer:
improved microbial resistance, improved hydrolysis resistance
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved microbial resistance, improved hydrolysis resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
795U
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
6052D
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 6072A
Manufacturer:
Injection molding grade, free from plasticizers, easy flowing, very good hydrolysis and microbial resistance, low abrasion
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade, free from plasticizers, easy flowing, very good hydrolysis and microbial resistance, low abrasion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 487 DPS062
Manufacturer:
grease and oil-resistant, low compression set, good heat resistance, short cycle times
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
grease and oil-resistant, low compression set, good heat resistance, short cycle times
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 6080A
Manufacturer:
free from plasticizers, easy flowing, very good hydrolysis and microbial resistance, low abrasion
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
free from plasticizers, easy flowing, very good hydrolysis and microbial resistance, low abrasion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 460
Manufacturer:
Injection molding grade grease and oil-resistant low compression set good heat resistance high elasticity
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade grease and oil-resistant low compression set good heat resistance high elasticity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 5377A
Manufacturer:
Fungus Resistance, Chemical Resistance, Hydrolytically Stable
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Fungus Resistance, Chemical Resistance, Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 453
Manufacturer:
grease and oil-resistant, low compression set, good wear resistance
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
grease and oil-resistant, low compression set, good wear resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
5080A
Manufacturer:
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 453 DPS041
Manufacturer:
Injection molding grade grease and oil-resistant hydrolysis-stabilised low compression set good wear resistance
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade grease and oil-resistant hydrolysis-stabilised low compression set good wear resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 6783A DPS 045
Manufacturer:
Opaque, Translucent
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Opaque, Translucent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 588 E
Manufacturer:
Extrusion- and injection molding grade, improved microbial resistance, Improved hydrolysis resistance
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade, improved microbial resistance, Improved hydrolysis resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 786E
Manufacturer:
Extrusion- and injection molding grade high mechanical strength very good hydrolysis and microbial resistance good low-temperature flexibility
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade high mechanical strength very good hydrolysis and microbial resistance good low-temperature flexibility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
790
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
445
Manufacturer:
grease and oil-resistant, good heat resistance, low compression set
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
grease and oil-resistant, good heat resistance, low compression set
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 392
Manufacturer:
No Characteristics
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 192
Manufacturer:
Injection molding grade with high mechanical strength for articles subject to wear
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade with high mechanical strength for articles subject to wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
385S_AG
Manufacturer:
high mechanical strength
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high mechanical strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3385A
Manufacturer:
good wear resistance, short cycle times, high melt stability
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear resistance, short cycle times, high melt stability
Recorded properties are for screening; verify source data and conditions.
Total 2573 materials | Scroll down for more