HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2573 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Desmopan 365X DPS300
Manufacturer:
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3059D
Manufacturer:
Injection molding grade with release agent, excellent abrasion resistance, good wear resistance, very short cycle times
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade with release agent, excellent abrasion resistance, good wear resistance, very short cycle times
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 385E
Manufacturer:
Extrusion- and injection molding grade high mechanical strength
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion- and injection molding grade high mechanical strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1050D
Manufacturer:
hydrolysis-stabilised, high mechanical strength
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
hydrolysis-stabilised, high mechanical strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3072D
Manufacturer:
high mechanical strength, excellent abrasion resistance, good wear resistance, very short cycle times
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high mechanical strength, excellent abrasion resistance, good wear resistance, very short cycle times
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3055D
Manufacturer:
Injection molding grade with high mechanical strength for articles subject to wear, excellent abrasion resistance, good wear resistance, very short cycle times
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade with high mechanical strength for articles subject to wear, excellent abrasion resistance, good wear resistance, very short cycle times
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3055DU
Manufacturer:
Injection molding grade with high mechanical strength for articles subject to wear with special UV stabilizers excellent abrasion resistance good wear resistance very short cycle times
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection molding grade with high mechanical strength for articles subject to wear with special UV stabilizers excellent abrasion resistance good wear resistance very short cycle times
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPEU9000-50D
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmopan 3065D
Manufacturer:
injection molding grade high mechanical strength excellent abrasion resistance good wear resistance very short cycle times
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
injection molding grade high mechanical strength excellent abrasion resistance good wear resistance very short cycle times
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPEU9500-65D-RX
Manufacturer:
No Characteristics
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ChronoThane T™ 93A-B40
Manufacturer:
High impact or impact modified
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ChronoFlex AL™ 55D
Manufacturer:
Contains renewable resources, Medical Grade, Biocompatibility
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Medical Grade, Biocompatibility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Carbothane® Aliphatic PC-3555D
Manufacturer:
Injection Molding, Other Extrusion, General Chemical Resistance, Oxidation Resistance
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, General Chemical Resistance, Oxidation Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ChronoThane T™ 80A
Manufacturer:
High impact or impact modified
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Aliphatic PC-3595A
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Aliphatic PC-3572D
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ChronoFlex AL™ 75A-B20
Manufacturer:
Contains renewable resources, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Aliphatic PC-3575A
Manufacturer:
Carbothane
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Carbothane® Aromatic AC-4055D
Manufacturer:
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ChronoThane P™ 80A
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 2573 materials | Scroll down for more