HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2967 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
DURACON® AW-01 (POM+PE)
制造商:
None
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURACON® AW-01LV (POM+PE)
制造商:
None
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURACON® TW-31 (POM+PE)-MD15
制造商:
None
Low Warpage, Tribologic Grade
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURACON® AW-01LV (POM+PE)
制造商:
None
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURACON® SW-01 (POM+PE)-X10
制造商:
None
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LOXISTAL POM/PE MR10 LU 19003 (POM+PE)-K10
制造商:
None
Creep Resistance, Tribologic Grade Additives, Chemical Resistance, Lubricants, General Chemical Resistance, Special Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Tribologic Grade Additives, Chemical Resistance, Lubricants, General Chemical Resistance, Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
DURACON® TW-51 (POM+PE)-MD30
制造商:
None
Low Warpage, Tribologic Grade
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon NC940
制造商:
None
Injection Molding Anti-static
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Anti-static
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon TX940
制造商:
None
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon NW901
制造商:
None
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon TX910
制造商:
None
High impact or impact modified
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Ultraform® N2320 U03 AT UN
制造商:
巴斯夫
U.V. stabilized or stable to weather
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon TX915
制造商:
None
High impact or impact modified
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon TX920
制造商:
None
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon ST915
制造商:
None
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon EX910
制造商:
None
Injection Molding Anti-static
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Anti-static
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titacon EX210
制造商:
None
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TEREZ® O 300
制造商:
None
Medium viscosity standard grade for moulding parts of all kind. Wheels, rollers applications, clips, fasteners, nuts and screws, bearings and clutch parts.
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity standard grade for moulding parts of all kind. Wheels, rollers applications, clips, fasteners, nuts and screws, bearings and clutch parts.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 ST NTLA010 PR327
制造商:
Tenopom®
Injection Molding Copolymer
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 UV CNZ0061 PR352
制造商:
Tenopom
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 2967 materials | Scroll down for more