HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2967 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
B3 MF UV NTLA010 PR329
制造商:
None
Injection Molding Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Tenopom® B3 MF TZ NTLA010 PR318
制造商:
None
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 P5 S2 MF ST NTLA016 PR345
制造商:
None
Fatigue Resistance, High Coefficient of Friction, Copolymer
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Fatigue Resistance, High Coefficient of Friction, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 MF M3 NTLA014 PR337
制造商:
Tenopom®
Injection Molding Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 MF PRTA011 PR311
制造商:
None
Injection Molding Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 MF TZ CNZ0069 PR339
制造商:
Tenopom®
High impact or impact modified
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C ZH760
制造商:
旭化成
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 MF AZL0586 PR320
制造商:
Tenopom
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 M2 NTLA014 PR302
制造商:
Tenopom
Injection Molding Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
A3 HF CNZA010 PR330 MSP
制造商:
Tenopom®
Homopolymer
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Tenopom® A3 LF PRTA010 PR315
制造商:
None
Injection Molding Copolymer
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Tenopom® B3 HF NTLA010 PR306
制造商:
None
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C Z4520
制造商:
None
Injection Molding Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C HC460
制造商:
旭化成
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C 8520
制造商:
旭化成
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C LT350
制造商:
None
High impact or impact modified
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C LX750
制造商:
None
Processing/Physical Characteristics Value Unit Test Standard ISO Data
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics Value Unit Test Standard ISO Data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C HC760
制造商:
旭化成
Copolymer
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™ LT804
制造商:
旭化成
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
TENAC™-C 4513
制造商:
None
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 2967 materials | Scroll down for more