HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2967 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
HOSTAFORM® C 27021 XAP® C
制造商:
Celanese
Easy flow injection molding grade with very low emissions and migrations
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy flow injection molding grade with very low emissions and migrations
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 52021
制造商:
赛兰尼斯
Extremely easy flowing, good chemical resistance, high resistance to thermal and oxidative degradation
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extremely easy flowing, good chemical resistance, high resistance to thermal and oxidative degradation
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
C 52021 XAP®
制造商:
HOSTAFORM®
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 27021 XAP®2 LS
制造商:
Celanese
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 13021 XAP®
制造商:
塞拉尼斯
易流动,注塑成型,高刚性,硬度,韧性,良好的化学耐性,良好的水解耐性,高抗热和氧化降解
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
易流动,注塑成型,高刚性,硬度,韧性,良好的化学耐性,良好的水解耐性,高抗热和氧化降解
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 2521 10/1570
制造商:
塞拉尼斯
Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; UV-stabilized with carbon black, good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation.
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; UV-stabilized with carbon black, good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 13031 XF
制造商:
赛兰尼斯
Weldable, Copolymer
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Weldable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 13031 XAP®
制造商:
赛兰尼斯
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 13021
制造商:
赛兰尼斯
Easy flowing, Injection molding type, High rigidity, Hardness, Toughness, Good chemical resistance, Good hydrolysis resistance, High resistance to thermal and oxidative degradation
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy flowing, Injection molding type, High rigidity, Hardness, Toughness, Good chemical resistance, Good hydrolysis resistance, High resistance to thermal and oxidative degradation
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 13021 LS
制造商:
塞拉尼斯
Easy flowing Injection molding type for precision molded parts and thin-walled molded parts with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. With UV Additives Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances.
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy flowing Injection molding type for precision molded parts and thin-walled molded parts with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. With UV Additives Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances.
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HOSTAFORM® C 13031
制造商:
塞拉尼斯
Easy flowing, High strength, High rigidity, High hardness, Good chemical resistance, Good hydrolysis resistance, High resistance to thermal and oxidative degradation
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy flowing, High strength, High rigidity, High hardness, Good chemical resistance, Good hydrolysis resistance, High resistance to thermal and oxidative degradation
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FV3025
制造商:
None
High impact or impact modified
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FV3035
制造商:
None
High impact or impact modified
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FM130
制造商:
台塑企业
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ESD 800
制造商:
RTP公司
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FM025
制造商:
福寿塑料公司
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FM90
制造商:
台化塑料公司
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
FM270
制造商:
台化塑料公司
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
R6
制造商:
台塑企业
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Edgetek™ AT-000/000 GREY VN-3581
制造商:
艾文特公司
Copolymer
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 2967 materials | Scroll down for more